HL54-35 Epoxide Asphalt Oil-proof Surface Paint

HL54-35 Epoxide Asphalt Oil-proof Surface Paint (two components)

Intended Uses With touch paint film and strong adhesion, it has good rust resistance characteristics, excellent mineral oil, water resistance performances and durability; it is applied to fuel cabin, crude bunker, ballast tank and main frame as protective paint.
Product Description It is prepared by epoxide resin, coal tar pitch, aluminum paste powder and solvent, etc. It is packed into Component A and Component B.(Brown)
Product Information Volume Solids 50%
Dry Film Thickness 60 microns
Theoretical Coverage 175g/m2,8.30m2/L(calculated by 60μm dry film)
Application Details Mix Ratio Component A (paint):Component B(curing agent=1:1(weight ratio)
Curing Time 23±2℃,0.5~1h
Method of Application  
Airless Spray Recommended-Tip range 0.33-0.41mm, Output fluid pressure; 17.6-21.1MPa(176-211Kg/sq.cn)
Brush or Roller Recommended, only for small area.
Conventional Spray Adoptable but thin to 5-10%, Tip range:2-2.5mm
Thinner X-7
Cleaner X-7
Pot Life 25℃;8 hours
Storage Life One year
Drying Time Substrate Temperature Touch Dry (h) Hard Dry (h) Full Solidification (d) Overcoating Interval
Minimum Maximum
25℃ 4 24 7 24hours No limit
Painting number Suggest 2 paintings; dry film reaches 100~200μm.
Storage and Handing Storage Store in cool and dry conditions
Pack Size Component A 18kg, Component B 8kg.
Flash Point 39℃
Specific Gravity Approx 1.45kg/L
Specification and Surface Preparation Preceding paint shall be totally dry and throughly clean all oil stain and dirt on paint film.
Preceding Paint Epoxy asphalt oil-proof primer
Limitations Substrate temperature must be 3℃ higher than dew point above, and relative humidity must be less than 85%, when consturction substrate temperature is less than 5℃, epoxy and curing agent will stop reaction, and construction can not be conducted.
Safety Precautions This product should be used in painting area by professional operations. When painting, please refer to Product Data Sheet and MSDS. Consult our company if consumers could not completely understand the precautions for safety and health when applying this product.
This product is a kind of solvent-based paint. In order to avoid danger or accident, minimal safety precautions, as follow, should be done;
The paint contains volatile solvent and is flammable. So must keep away form sparks and open flames. No smoking at application site. Effective precautions (such as using explosion-proof electrical equipments, no static electricity accumulation or metal collision etc) also should be done so as to avoid producing sparks. Flash point of paint, mentioned above o Product Data Sheet, is the lowest temperature at which mixture of the volatile materials of paint can ignite or explode with air.
Enough ventilation is necessary at application site. In order to remove any danger of explosion, must keep the ratio of gas to air is less than 10%, the minimum explosive limit in general. Therefore, 200m3 of ventilation quantity per 1kg solvent (according to the solvent) is necessary.
Protect skin and eyes, and avoid touching with paints (Recommend to wear working clothes, gloves, eye protection, face masks, barries creams and so on). If paint gets in touch with skin, wash fully with a large amount of fresh water and soap or appropriate commercial cleaner. In case of eyes being contaminated, rinse with fresh water for 10min at least and give medical treatment immediately.
Recommend face guard with ventilation pipe for the sake of no absorption of paint fog and harmful solvent gas, especially in bad ventilation. Handle empty containers with care and do not bring about environmental contamination.
NOTICE: If consumers have not taken effective safety precautions (Refer to the specifications), out company will NOT be responsiblefor any accident.