%{tishi_zhanwei}%

High Grade Building Latex Paintspecial Sealer

High Grade Building Latex Paintspecial Sealer

Intended Uses The paint film has excellent alkali and water resistance with good penetration and adhesion to base materials. It is of convinient construction, fast drying, nontoxity and safety. It can be applicable to cement mortar, concrete, uralite, ceiling and other base material surfaces.
Product Description  The product is special sealer prepared byacrylic copolymer emulsion and multiple auxiliaries. (Milkly white)
Product Information Dry Film Thickness 10~20 microns
Theoretical Coverage 67g/㎡
Application Details Method of Application
Brush or Roller Recommended
Thinner Generally there is no need to dilut
Storage Life 6 months
Drying
Time
Substrate
Temperature
Touch
Dry(min)
Overcoating Interval

Minimum

Maximum
25℃ ≤30 3h No limit
Painting number 1 coats
Storage and Handing Storage Store in cool and dry conditions
Pack Size 16kg
Specific Gravity Approx 1.01kg/L
Specification and Surface Preparation The quality of the base applied with cement mortar and concrete shall comply with JGJ73-97 (Code for Construction and Acceptance of Building Decoration Projects). Base surface must be clean, dry and solid without oil stain and other dirt and PH value is less than 10. For wall with old paint film, it shall clean out loose, deciduous and chalked paint film and polish it with sand paper. For surface pitted skin and gap, it shall screed with our company's building paintspecial putty. It requires construciton as soon as possible on dry wall after treatment to avoid re-pollution.
Preceding Paint Speical putty for building paint.
Subsequent Paint Various latex investment precoat or compound textured latex paint intermediate coating.
Limitations 1.Paint shall be stored in shady, dry warehouses without direct sunlight at 0~40℃.
2.It is not proper to construct when temperature is lower than 10℃ and relative humidity is higher than 85%.
3.It must be stirred evenly before painting. Stirctly control diluent content. It will lead to paint film quality decreasing if adding too much.
4.Oil stain or organic solvent are strictly prohibited to be mixed into paint during use.
5.It shall use paint of the same batch number on the same building as much as possible.
6.It can be handled as non-dangerous articles in transport.
Safety Precautions This product should be used in painting area by professional operations. When painting, please refer to Product Data Sheet and MSDS. Consult our company if consumers could not completely understand the precautions for safety and health when applying this product.
This product is a kind of solvent-based paint. In order to avoid danger or accident, minimal safety precautions, as follow, should be done;
The paint contains volatile solvent and is flammable. So must keep away form sparks and open flames. No smoking at application site. Effective precautions (such as using explosion-proof electrical equipments, no static electricity accumulation or metal collision etc) also should be done so as to avoid producing sparks. Flash point of paint, mentioned above o Product Data Sheet, is the lowest temperature at which mixture of the volatile materials of paint can ignite or explode with air.
Enough ventilation is necessary at application site. In order to remove any danger of explosion, must keep the ratio of gas to air is less than 10%, the minimum explosive limit in general. Therefore, 200m3 of ventilation quantity per 1kg solvent (according to the solvent) is necessary.
Protect skin and eyes, and avoid touching with paints (Recommend to wear working clothes, gloves, eye protection, face masks, barries creams and so on). If paint gets in touch with skin, wash fully with a large amount of fresh water and soap or appropriate commercial cleaner. In case of eyes being contaminated, rinse with fresh water for 10min at least and give medical treatment immediately.
Recommend face guard with ventilation pipe for the sake of no absorption of paint fog and harmful solvent gas, especially in bad ventilation.
Handle empty containers with care and do not bring about environmental contamination.
NOTICE: If consumers have not taken effective safety precautions (Refer to the specifications), out company will NOT be responsiblefor any accident.