%{tishi_zhanwei}%

H54-32 Product Tank Internal Wall High-build Paint

H54-32 Product Tank Internal Wall High-build Paint (primer/surface Paint, Double Components)

Intended Uses Good chemical corrosion-proof resistance, oil, water, sea water, temperature, avlavtion resistance gasoline, aviation kerosene and lubricant, kerosene and engine oil ,etc. Nontoxic paint, strong adhesion, good wearing quality, high solid, drying in normal temperature, convinient construction; It is applicable to internal wall protection of cabin and store loading gasoline, kerosene and engine oil, etc.
Product Description It is prepared byeposide resin, corrosion-proof pigment and filler, mixed solvent, additive and modified amine curing agent. It is packed into Component A and Component B; Component B is general curing agent of primer and surface paint.(Primer: iron red; surface paint: white)
Product Information Volume Solids 56%
Dry Film Thickness 100 microns
Theoretical Coverage Primer: 320g/m2, Surface paint: 260g/m2
Application Details Mix Ratio Primer: Component A:Component B=25:3(By weight)
Surface paint: Component A: Component B=24:3.6(By weight)
Curing Time 23±2℃,0.5~1h
Method of Application
Airless Spray Recommended-Tip range: 0.43-0.53mm; Total output fluid pressure: 17.6-21.1MPa(176-21117kg/c㎡)
Brush or Roller Recommended, only for small area.
Conventional Spray Adoptable but thin to 5-10%, Tip range: 2-2.5mm
Thinner X-7
Pot Life 25℃;8 hours
Storage Life One year
Drying
Time
Substrate
Temperature
Touch
Dry(h)
Hard
Dry(h)
Full Solidification(d) Overcoating Interval
Minimum Maximum
25℃ 1 24 7 24 hours 7 days
Painting number Suggest high pressure airless spraying one coat of primer, and applying 2 coats of surface paint after dry film reaches 100μm till dry film reaches 150~200μm.
Storage and Handing Storage Store in cool and dry conditions
Pack Size Primer:Component A 25kg, Component B 3kg,
Surface paint: Component B 24kg, Component B 3.6kg.
Flash Point 25℃
Specific Gravity Primer: approx 1.46kg/L, Surface paint: approx 1.39kg/L。
Specification and Surface Preparation After cabin or store tank assembly, overall derusting reaches Swedish Derusting Standard Sa2.5; if steel requires temporary protection, inorganic zinc-rich type primer can be painted. Throughly clean damaged and loose primer and dirt before painting.
Preceding Paint Inorganic zinc metasilicate primer and inorganic zinc-rich primer, etc.
Limitations Relative humidity must be lower than 85%, painted surface temperature shall be 3℃ higher than that of dew point.
Safety Precautions This product should be used in painting area by professional operations. When painting, please refer to Product Data Sheet and MSDS. Consult our company if consumers could not completely understand the precautions for safety and health when applying this product.
This product is a kind of solvent-based paint. In order to avoid danger or accident, minimal safety precautions, as follow, should be done;
The paint contains volatile solvent and is flammable. So must keep away form sparks and open flames. No smoking at application site. Effective precautions (such as using explosion-proof electrical equipments, no static electricity accumulation or metal collision etc) also should be done so as to avoid producing sparks. Flash point of paint, mentioned above o Product Data Sheet, is the lowest temperature at which mixture of the volatile materials of paint can ignite or explode with air.
Enough ventilation is necessary at application site. In order to remove any danger of explosion, must keep the ratio of gas to air is less than 10%, the minimum explosive limit in general. Therefore, 200m3 of ventilation quantity per 1kg solvent (according to the solvent) is necessary.
Protect skin and eyes, and avoid touching with paints (Recommend to wear working clothes, gloves, eye protection, face masks, barries creams and so on). If paint gets in touch with skin, wash fully with a large amount of fresh water and soap or appropriate commercial cleaner. In case of eyes being contaminated, rinse with fresh water for 10min at least and give medical treatment immediately.
Recommend face guard with ventilation pipe for the sake of no absorption of paint fog and harmful solvent gas, especially in bad ventilation.
Handle empty containers with care and do not bring about environmental contamination.
NOTICE: If consumers have not taken effective safety precautions (Refer to the specifications), out company will NOT be responsiblefor any accident.