%{tishi_zhanwei}%

B77-1 High-grade Interior Latex Paint

B77-1 High-grade Interior Latex Paint

Intended Uses Paint film has good resistance to water, alkali, washing and mildew. It has strong adhension, convinient construction, fast drying, nontoxity and safety. According to technical target requirements of national standard GB/T9756-2001, the product is of top grade. It can be applicable to concrete, cement mortar, plaster and other base material surfaces and is mainly used as inernal wall decoartion of private houses and public buildings.
Product Description  It is prepared bypure acrylic copolymer emulsion, excellent quality pigment and filler and auxiliaries. (Various color, flat)
Product Information Dry Film Thickness 32 microns
Theoretical Coverage 139g/㎡, (calculated by 50μm dry film)
Application Details Method of Application  
Brush or Roller Recommended, only for small area.
Conventional Spray Adoptable but thin to 5-10%, Tip range: 2-2.5mm
Thinner Deionized water or clean water, water-adding volume ≤5% (weight)
Cleaner Deionized water or clean water
Storage Life 6 months
Drying
Time
Substrate
Temperature
Touch
Dry(h)
Hard
Dry(h)
Overcoating Interval
Minimum Maximum
25℃ ≤40 2 4h No limit
Painting number 2 coats
Storage and Handing Storage Store in cool and dry conditions
Pack Size 30kg
Specific Gravity Approx 1.53kg/L
Specification and Surface Preparation   For clean and dry wall which has been painted with high grade building latex paintspecial sealer or compound latex paint temperature coating, the paint can be directly used. If the wall is polluted again, paint it after removing pollution.
Preceding Paint Use high grade building latex paintspecial sealer or compound latex paint intermediate coating.
Limitations  1.Paint shall be stored in shady, dry warehouses without direct sunlight at 0~40℃.
2.It is not proper to construct when temperature is lower than 10℃ and relative humidity is higher than 85%.
3.It is not proper to construct with high temperature, direct sunlight or strong wind.
4.Intermediate coating shall be painted after sealer dry.
5.It must be stirred evenly before painting. Stirctly control diluent content. It will lead to paint film quality decreasing if adding too much.
6.Oil stain or organic solvent are strictly prohibited to be mixed into paint during use.
7.It can be handled as non-dangerous articles in transport.
Safety Precautions This product should be used in painting area by professional operations. When painting, please refer to Product Data Sheet and MSDS. Consult our company if consumers could not completely understand the precautions for safety and health when applying this product.
This product is a kind of solvent-based paint. In order to avoid danger or accident, minimal safety precautions, as follow, should be done;
The paint contains volatile solvent and is flammable. So must keep away form sparks and open flames. No smoking at application site. Effective precautions (such as using explosion-proof electrical equipments, no static electricity accumulation or metal collision etc) also should be done so as to avoid producing sparks. Flash point of paint, mentioned above o Product Data Sheet, is the lowest temperature at which mixture of the volatile materials of paint can ignite or explode with air.
Enough ventilation is necessary at application site. In order to remove any danger of explosion, must keep the ratio of gas to air is less than 10%, the minimum explosive limit in general. Therefore, 200m3 of ventilation quantity per 1kg solvent (according to the solvent) is necessary.
Protect skin and eyes, and avoid touching with paints (Recommend to wear working clothes, gloves, eye protection, face masks, barries creams and so on). If paint gets in touch with skin, wash fully with a large amount of fresh water and soap or appropriate commercial cleaner. In case of eyes being contaminated, rinse with fresh water for 10min at least and give medical treatment immediately.
Recommend face guard with ventilation pipe for the sake of no absorption of paint fog and harmful solvent gas, especially in bad ventilation.
Handle empty containers with care and do not bring about environmental contamination.
NOTICE: If consumers have not taken effective safety precautions (Refer to the specifications), out company will NOT be responsiblefor any accident.