%{tishi_zhanwei}%

Heat-insulation And Corrosion-proof Paint (Thermal Insulation Glue)

Heat-insulation And Corrosion-proof Paint (Thermal Insulation Glue)

Intended Uses As a new heat-insulation reflecting anti-corrosive paint, widely used on the surface of metal tank, oil pipes, petroleum storage cans and shipments, refrigeration house, barnm metal house proof etc. The reflect rate is high (≥0.70), the seepager-resistance and adhesion is outstanding.
It can decrease the temperature of steel, for suface (10-20℃), for inner(5-10℃)
Product Description  Two-packs acrylic polyurethane paint, excellent appearance and resistant to weather, salt fog resistant, oil-resistant, stable to chemicals. White or other light colors, no gloss.
Product Information Volume Solids 55%
Dry Film Thickness 100-300μm, according to the requirements of fact scene
Theoretical Coverage 218g/㎡
Pratical Coverage Allow appropriate loss
Application Details Mix Ratio A:B=8:1(By weight)
Method of Application
Airless Spray Recommended
Brush or Roller Suitable
Conventional Spray Recommended only for small area.
Thinner X-13
Cleaner X-13
Pot Life 5℃:6 hours
25℃:4 hours
35℃:2 hours
Storage Life One year
Drying
Time
Substrate
Temperature
Touch
Dry(h)
Hard
Dry(h)
Overcoating Interval
Minimum Maximum
23℃ ≤1 ≤24 16h No limit
Storage and Handing Storage Dry and cool conditions, far from fire and heat source.
Pack Size A: 18kg in 20 liter container
B: 2.5kg in 4 liter container
Flash Point >23℃
Specific Gravity 1.20kg/L
Specification and Surface Preparation The new steel surface: Blast clean to the Swedish Standard SIS055900 Sa2.5, oil and grease removed with proper cleaner. It is same to anti-corrosive primer or inter mediate paint.
The recommened preceding coat: zinc-rich primer, epoxy primer, epoxy inter mediate paint etc.
Limitations Thicker is the coat, better is the effect about decreasing the temperature. Recommended rolling three coats or airless sparying two coats, the thickness should be more than 90 μm.
Safety Precautions This product should be used in painting area by professional operations. When painting, please refer to Product Data Sheet and MSDS. Consult our company if consumers could not completely understand the precautions for safety and health when applying this product.
This product is a kind of solvent-based paint. In order to avoid danger or accident, minimal safety precautions, as follow, should be done;
The paint contains volatile solvent and is flammable. So must keep away form sparks and open flames. No smoking at application site. Effective precautions (such as using explosion-proof electrical equipments, no static electricity accumulation or metal collision etc) also should be done so as to avoid producing sparks. Flash point of paint, mentioned above o Product Data Sheet, is the lowest temperature at which mixture of the volatile materials of paint can ignite or explode with air.
Enough ventilation is necessary at application site. In order to remove any danger of explosion, must keep the ratio of gas to air is less than 10%, the minimum explosive limit in general. Therefore, 200m3 of ventilation quantity per 1kg solvent (according to the solvent) is necessary.
Protect skin and eyes, and avoid touching with paints (Recommend to wear working clothes, gloves, eye protection, face masks, barries creams and so on). If paint gets in touch with skin, wash fully with a large amount of fresh water and soap or appropriate commercial cleaner. In case of eyes being contaminated, rinse with fresh water for 10min at least and give medical treatment immediately.
Recommend face guard with ventilation pipe for the sake of no absorption of paint fog and harmful solvent gas, especially in bad ventilation.
Handle empty containers with care and do not bring about environmental contamination.
NOTICE: If consumers have not taken effective safety precautions (Refer to the specifications), out company will NOT be responsiblefor any accident.