%{tishi_zhanwei}%

W61-700 High-temperature-resist Paint (700℃)

W61-700 High-temperature-resist Paint (700℃)

Intended Uses Used to protecting and decorate all sorts of machines and equipments working at the temperature of 700℃, such as boiler, pipeline and heat-exchanger etc.
Product Description  A kind of inorganic-organic high temperature coating. Some colors may be made.
Product Information Volume Solids 60%
Dry Film Thickness 20-60 microns
Theoretical Coverage 107g/㎡(calculated by 50μm dry film)
Pratical Coverage Allow appropriate loss
Application Details Mix Ratio One package
Method of Application
Airless Spray Recommended
Brush or Roller Suitable
Conventional Spray Recommended
Thinner Special diluent for high-temperature-resistant and corrosion-proof paint
Cleaner Special diluent for high-temperature-resistant and corrosion-proof paint
Pot Life No limit
After mixing 25℃ 6 hours
Storage Life One year
Drying Time Substrate Temperature Touch Dry(h) Hard Dry(h) Hard Dry
35℃
25℃
20
20
24
36
Dry at 180-200℃
for 30-60 min.
Storage and Handing Storage Store in cool and dry conditions
Pack Size 20kg
Flash Point >35℃
Specific Gravity 1.3kg/L
Specification and Surface Preparation  Before Application: Check and treat the surface to be painted to be painted according to ISO Standard. Clean all greasy dirt by solvent cleaner and make the substrate surface accord with SSPC-SP1 Standard. The surface should be blasted to accord with Sa2.5 or rust-removed manually or with power tools in accordance with St3. No dirt or dust on substrate surface.
Should stir to even before application.
When use TR628-2, must mix component A and B according to the practical necessary quantity. Recomment making this paint just before planting with it. Should stir to even before application. In is recommended to use up in pot life in case it would cure and could not be used.
Safety Precautions This product should be used in painting area by professional operations. When painting, please refer to Product Data Sheet and MSDS. Consult our company if consumers could not completely understand the precautions for safety and health when applying this product.
This product is a kind of solvent-based paint. In order to avoid danger or accident, minimal safety precautions, as follow, should be done;
The paint contains volatile solvent and is flammable. So must keep away form sparks and open flames. No smoking at application site. Effective precautions (such as using explosion-proof electrical equipments, no static electricity accumulation or metal collision etc) also should be done so as to avoid producing sparks. Flash point of paint, mentioned above o Product Data Sheet, is the lowest temperature at which mixture of the volatile materials of paint can ignite or explode with air.
Enough ventilation is necessary at application site. In order to remove any danger of explosion, must keep the ratio of gas to air is less than 10%, the minimum explosive limit in general. Therefore, 200m3 of ventilation quantity per 1kg solvent (according to the solvent) is necessary.
Protect skin and eyes, and avoid touching with paints (Recommend to wear working clothes, gloves, eye protection, face masks, barries creams and so on). If paint gets in touch with skin, wash fully with a large amount of fresh water and soap or appropriate commercial cleaner. In case of eyes being contaminated, rinse with fresh water for 10min at least and give medical treatment immediately.
Recommend face guard with ventilation pipe for the sake of no absorption of paint fog and harmful solvent gas, especially in bad ventilation.
Handle empty containers with care and do not bring about environmental contamination.
NOTICE: If consumers have not taken effective safety precautions (Refer to the specifications), out company will NOT be responsiblefor any accident.