%{tishi_zhanwei}%

W61-600 Organic Silicon High Temperature Corrosion-proof Paint (600℃)

W61-600 Organic Silicon High Temperature Corrosion-proof Paint (600℃)

Intended Uses As a heat-resistant paint, may protect and decorate the equipments at working the temperature of 600℃, such as motor, boiler and pipeline etc.
Product Description  One package or two package. Silicone resin paint. Some colors may be made.
Product Information Volume Solids 50%
Dry Film Thickness 20-60 microns
Theoretical Coverage 100g/㎡
Pratical Coverage Allow appropriate loss
Application Details Mix Ratio One package
Method of Application
Airless Spray Recommended
Brush or Roller Suitable
Conventional Spray Recommended
Thinner Special diluent for high-temperature-resistant and corrosion-proof paint.
Cleaner Special diluent for high-temperature-resistant and corrosion-proof paint.
Pot Life No limit
Storage Life One year
Drying Time Substrate Temperature Touch Dry Hard Dry Hard Dry
10℃
25℃
35℃
2 hours
1 hours
30 min
48 hours
36 hours
24 hours
Dry at 180-200℃
for 30-60 min.
Storage and Handing Storage Store in cool and dry conditions
Pack Size 20kg
Flash Point Above 23℃
Specific Gravity 1.2-1.3kg/L
Specification and Surface Preparation   The surface should be blasted or rust-removed manually near to white.
After cleaning with cleaner, the surface must be free from dirt(such as and salt etc.)
Surface may have been paint with high-temperature primer(Recommend using, Iron Red or Chromate yellow high-temperature primer. Aluminium high-temperature paint).
Surface to be applied must be clean and dry.
Safety Precautions This product should be used in painting area by professional operations. When painting, please refer to Product Data Sheet and MSDS. Consult our company if consumers could not completely understand the precautions for safety and health when applying this product.
This product is a kind of solvent-based paint. In order to avoid danger or accident, minimal safety precautions, as follow, should be done;
The paint contains volatile solvent and is flammable. So must keep away form sparks and open flames. No smoking at application site. Effective precautions (such as using explosion-proof electrical equipments, no static electricity accumulation or metal collision etc) also should be done so as to avoid producing sparks. Flash point of paint, mentioned above o Product Data Sheet, is the lowest temperature at which mixture of the volatile materials of paint can ignite or explode with air.
Enough ventilation is necessary at application site. In order to remove any danger of explosion, must keep the ratio of gas to air is less than 10%, the minimum explosive limit in general. Therefore, 200m3 of ventilation quantity per 1kg solvent (according to the solvent) is necessary.
Protect skin and eyes, and avoid touching with paints (Recommend to wear working clothes, gloves, eye protection, face masks, barries creams and so on). If paint gets in touch with skin, wash fully with a large amount of fresh water and soap or appropriate commercial cleaner. In case of eyes being contaminated, rinse with fresh water for 10min at least and give medical treatment immediately.
Recommend face guard with ventilation pipe for the sake of no absorption of paint fog and harmful solvent gas, especially in bad ventilation.
Handle empty containers with care and do not bring about environmental contamination.
NOTICE: If consumers have not taken effective safety precautions (Refer to the specifications), out company will NOT be responsiblefor any accident.