%{tishi_zhanwei}%

W61-550 Organic Silicon High-temperature Resistance And Corrosion Proof Paint(surface paint, drying type)

W61-550 Organic Silicon High-temperature Resistance And Corrosion Proof Paint(surface paint, drying type)

Intended Uses With temperature change resistance, temperature resistance and inoxidizability and corrosion resistance at 550℃ high temperature. It is mainly applicable to motorcycle vent pipe, oven and various high temperature parts of other industries.
Product Description  It is prepared by epoxy modified organic silicon resin, special temperature-resistant and corrosion-proof paint; additive and auxiliaries, etc. (Primer: aluminium red; surface paint: black)
Product Information Volume Solids 55%
Dry Film Thickness Primer: 2.5μm; Surface paint: 20 μm
Theoretical Coverage Primer: 80g/m2
Surface paint: 90g/m2,(calculated by 25μm dry film)
Application Details Method of Application  
Airless Spray Recommended-Tip range: 0.33-0.41mm; Total output fluid pressure: 17.6-21.1MPa(176-211kg/c㎡)
Brush or Roller Recommended, only for small area.
Conventional Spray Adoptable but thin to 5-10%, Tip range: 2-2.5mm
Electrostatic painting  
Thinner W61-550 Special diluent for Organic sillion high-temperature resistant and corrosion proof paint
Storage Life One year
Drying Time 180℃:1h
Overcoating Interval 23±2℃:1h
Painting number 1 coat of primer, 25μm of dry film, 2 coats of surface paint, 40~50μm of dry film, 65~75μm in total
Storage and Handing Storage Store in cool and dry conditions
Pack Size 25kg
Flash Point 26℃
Specific Gravity Approx 1.30kg/L
Specification and Surface Preparation Steel surface requires shot blasting or sand blasting to Swedish Derusting Standard Sa2.5 and roughness reaches 25~50μm.
Limitations Substrate temperature must be 3℃ higher than dew point above, and relative humidity must be less than 85%.
Safety Precautions This product should be used in painting area by professional operations. When painting, please refer to Product Data Sheet and MSDS. Consult our company if consumers could not completely understand the precautions for safety and health when applying this product.
This product is a kind of solvent-based paint. In order to avoid danger or accident, minimal safety precautions, as follow, should be done;
The paint contains volatile solvent and is flammable. So must keep away form sparks and open flames. No smoking at application site. Effective precautions (such as using explosion-proof electrical equipments, no static electricity accumulation or metal collision etc) also should be done so as to avoid producing sparks. Flash point of paint, mentioned above o Product Data Sheet, is the lowest temperature at which mixture of the volatile materials of paint can ignite or explode with air.
Enough ventilation is necessary at application site. In order to remove any danger of explosion, must keep the ratio of gas to air is less than 10%, the minimum explosive limit in general. Therefore, 200m3 of ventilation quantity per 1kg solvent (according to the solvent) is necessary.
Protect skin and eyes, and avoid touching with paints (Recommend to wear working clothes, gloves, eye protection, face masks, barries creams and so on). If paint gets in touch with skin, wash fully with a large amount of fresh water and soap or appropriate commercial cleaner. In case of eyes being contaminated, rinse with fresh water for 10min at least and give medical treatment immediately.
Recommend face guard with ventilation pipe for the sake of no absorption of paint fog and harmful solvent gas, especially in bad ventilation.
Handle empty containers with care and do not bring about environmental contamination.
NOTICE: If consumers have not taken effective safety precautions (Refer to the specifications), out company will NOT be responsiblefor any accident.