%{tishi_zhanwei}%

C61-200 Alkyd Heat Resistance Paint

C61-200 Alkyd Heat Resistance Paint

Intended Uses Used for heat-resistance, anti-corrosion and decoration on steel surface in metallurgical, mechanical industries and heat-insulating work, it forms a coating with heat-resistance up to 200℃ and is possessed of the properties that conventional alkyd paint owns.
Product Description  Silver, Aluminium heat resistant paint, two packages.
Product Information Volume Solids 40%
Dry Film Thickness 30 microns equivalent to 75 microns wet.
Theoretical Coverage 85g/m2
Application Details Mix Ratio Allow appropriate loss
Method of Application  
Airless Spray Recommended-Tip range: 0.33-0.41mm; Output fluid pressure: 17.6-21.1MPa(176-211kg/c㎡)
Brush or Roller Suitable
Conventional Spray Recommended
Thinner X-6 Maximum thinning <5%
Cleaner X-6
Pot Life 25℃ 12 hours
Storage Life One year
Drying Time Substrate Temperature Touch Dry
(h)
Hard Dry
(h)
Overcoating Interval
Minimum Maximum
25℃ 4 24 24-48 hours
(12-25℃)
20 hours
(Above 12-25℃)
No limit
Storage and Handing Storage Store in cool and dry conditions
Pack Size A: 16kg in 20 liter container
B: 4kg in 4 liter container
Flash Point 35℃
Specific Gravity Apprpx 1.13kg/L
Specification and Surface Preparation Steel surface: Blast to Swedish Standard SIS055900 Sa2.5 or rust-removed manually or with power tool to Swedish Standard St3 before application.
Limitations Recommended coat: Spray two coats with high-pressure airless spray for the pressure of reaching 60 microns of dry film thickness.
Preceding coat: Inorganic zinc rich primer, or no primer is used.
Safety Precautions This product should be used in painting area by professional operations. When painting, please refer to Product Data Sheet and MSDS. Consult our company if consumers could not completely understand the precautions for safety and health when applying this product.
This product is a kind of solvent-based paint. In order to avoid danger or accident, minimal safety precautions, as follow, should be done;
The paint contains volatile solvent and is flammable. So must keep away form sparks and open flames. No smoking at application site. Effective precautions (such as using explosion-proof electrical equipments, no static electricity accumulation or metal collision etc) also should be done so as to avoid producing sparks. Flash point of paint, mentioned above o Product Data Sheet, is the lowest temperature at which mixture of the volatile materials of paint can ignite or explode with air.
Enough ventilation is necessary at application site. In order to remove any danger of explosion, must keep the ratio of gas to air is less than 10%, the minimum explosive limit in general. Therefore, 200m3 of ventilation quantity per 1kg solvent (according to the solvent) is necessary.
Protect skin and eyes, and avoid touching with paints (Recommend to wear working clothes, gloves, eye protection, face masks, barries creams and so on). If paint gets in touch with skin, wash fully with a large amount of fresh water and soap or appropriate commercial cleaner. In case of eyes being contaminated, rinse with fresh water for 10min at least and give medical treatment immediately.
Recommend face guard with ventilation pipe for the sake of no absorption of paint fog and harmful solvent gas, especially in bad ventilation.
Handle empty containers with care and do not bring about environmental contamination.
NOTICE: If consumers have not taken effective safety precautions (Refer to the specifications), out company will NOT be responsiblefor any accident.