FH61-150 Heat-resist And Corrosion-proof Paint

FH61-150 Heat-resist And Corrosion-proof Paint (primer/surface Paint, Double/tripe Components)

Intended Uses Paint film has strong adhesion, excellent toughness, fast dry performance, boiling water and moist heat resistance, good acid, alkali, salt corrosion resistance performance. It is applicable to outer wall of heat supply pipelines and can be used for a long time under the circumstance at 150℃.
Product Description  Double-component packed paint is prepared by phenol-modified epoxide resin as basic materials, adding high temperature resistance pigment and filler, additive and curing agent, etc.
Product Information Volume Solids 45%
Dry Film Thickness Primer: 40μm, Surface paint: 50μm
Theoretical Coverage Primer: 120g/m2(calculated by 50μm dry film)
Surface paint: 130g/m2(calculated by 50μm dry film)
Application Details Mix Ratio Primer: Component A : Component B=100:5~7(weight ratio)
Surface paint: Component A : Component B=100:6~8(weight ratio)
Curing Time 23±2℃:15~30min
Method of Application  
Airless Spray Recommended-Tip range: 17-21mm; Total fluid pressure: 15-20MPa
Brush or Roller Recommended, only for small area.
Conventional Spray Adoptable but thin to 5-10%, Tip range: 2-2.5mm
Thinner FH61-150 Special diluent
Cleaner FH61-150 Special diluent
Pot Life 25℃:8 hours
Storage Life One year
Overcoating Interval
Minimum Maximum
25℃ 1 24 24 hours 7 days
Painting number Suggest high pressure airless spraying a coat of primer, after dry film reaches 40~50μm
Storage and Handing Pack Size Primer: Component A 20kg, Component B 1~1.4kg
Surface paint: Component A 20kg,Component B 1.2~1.6kg
Specific Gravity Approx 1.10kg/L
Specification and Surface Preparation Steel surface requires sand blasting to Swedish Derusting Standard Sa2.5 and roughness to 25-50μm
Limitations Substrate temperature must be 3℃ higher than that of dew point when temperature is above 10℃, relative humidity must be lower than 85%.
Safety Precautions This product should be used in painting area by professional operations. When painting, please refer to Product Data Sheet and MSDS. Consult our company if consumers could not completely understand the precautions for safety and health when applying this product.
This product is a kind of solvent-based paint. In order to avoid danger or accident, minimal safety precautions, as follow, should be done;
The paint contains volatile solvent and is flammable. So must keep away form sparks and open flames. No smoking at application site. Effective precautions (such as using explosion-proof electrical equipments, no static electricity accumulation or metal collision etc) also should be done so as to avoid producing sparks. Flash point of paint, mentioned above o Product Data Sheet, is the lowest temperature at which mixture of the volatile materials of paint can ignite or explode with air.
Enough ventilation is necessary at application site. In order to remove any danger of explosion, must keep the ratio of gas to air is less than 10%, the minimum explosive limit in general. Therefore, 200m3 of ventilation quantity per 1kg solvent (according to the solvent) is necessary.
Protect skin and eyes, and avoid touching with paints (Recommend to wear working clothes, gloves, eye protection, face masks, barries creams and so on). If paint gets in touch with skin, wash fully with a large amount of fresh water and soap or appropriate commercial cleaner. In case of eyes being contaminated, rinse with fresh water for 10min at least and give medical treatment immediately.
Recommend face guard with ventilation pipe for the sake of no absorption of paint fog and harmful solvent gas, especially in bad ventilation.
Handle empty containers with care and do not bring about environmental contamination.
NOTICE: If consumers have not taken effective safety precautions (Refer to the specifications), out company will NOT be responsiblefor any accident.