%{tishi_zhanwei}%

LF52-12 Fluorocarbon Paint

LF52-12 Fluorocarbon Paint (Finish)

Intended Uses Suited for steel structures or exterior walls in various abominable conditions as high functional protective and decorative finish. The coat can be used at the temperature condition within -50℃-150℃ for a long time.
Product Description  It is a industrial protective and decorative finish with high property. Semi-gloss or high-golss. The coat possesses long-term gloss and color retention because the F-C bond in the molecoular chain of fluorocarbon resin has excellent resistance to degradation due to ultraviolet light.
This coat possesses self-lubricating function and the wetting angle to water is 80-100 and more. Therefore, the film is very smooth with low adhesion property, not easy to be blemished and easy to clean.
Two packages, Fluorocarbon top coat. B component is curing agent of aliphatic isocyanate.
Product Information Volume Solids 50-55%, depends on the color
Color All colors
Dry Film Thickness 30-50 microns
Theoretical Coverage 95~120g/m2(calculated by 50μm dry film)
Practical Coverage Allow appropriate loss
Application Details Mix Ratio A:B=8:1(By weight)
Method of Application
Airless Spray Recommended
Brush or Roller Recommended
Conventional Spray Suitable, but diluting is necessary
Thinner X-20
Cleaner X-20
Pot Life 35℃-8 hours ;25℃-4 hours;15℃-6 hours
Storage Life A: One year B: 6 months
Drying
Time
Substrate
Temperature
Touch
Dry
(h)
Hard
Dry
(h)
Overcoating Interval
Minimum Maximum
35℃
25℃
0.5
1
8
16
4 hours
6 hours
1 days
3 days
Storage and Handing Storage Dry and cool conditions
Pack Size A: 20kg in 20 liter container
B: 2.5kg in 4 liter container
Flash Point > 23℃(A,B Mixture)
Specific Gravity 1.05-1.20kg/L
Specification and Surface Preparation   Steel structure: Be used for the surface painting over right primer or intermediate coating and the surface must keep clean, dry and no oil dirty.
Enterior wall: The new cement or concert wall must have been completed for 10 days at least, the content of water is less than 10%, the wall must be smooth and thick. May knife right filler to smooth and rub flat, then paint this product.
Limitations The components must be mixed according to specific mixed ratio and used up within pot life.
Storage and painting must avoid touching moisture.
In the high temperature, the maximum overcoating interval is only one day.
Safety Precautions This product should be used in painting area by professional operations. When painting, please refer to Product Data Sheet and MSDS. Consult our company if consumers could not completely understand the precautions for safety and health when applying this product.
This product is a kind of solvent-based paint. In order to avoid danger or accident, minimal safety precautions, as follow, should be done;
The paint contains volatile solvent and is flammable. So must keep away form sparks and open flames. No smoking at application site. Effective precautions (such as using explosion-proof electrical equipments, no static electricity accumulation or metal collision etc) also should be done so as to avoid producing sparks. Flash point of paint, mentioned above o Product Data Sheet, is the lowest temperature at which mixture of the volatile materials of paint can ignite or explode with air.
Enough ventilation is necessary at application site. In order to remove any danger of explosion, must keep the ratio of gas to air is less than 10%, the minimum explosive limit in general. Therefore, 200m3 of ventilation quantity per 1kg solvent (according to the solvent) is necessary.
Protect skin and eyes, and avoid touching with paints (Recommend to wear working clothes, gloves, eye protection, face masks, barries creams and so on). If paint gets in touch with skin, wash fully with a large amount of fresh water and soap or appropriate commercial cleaner. In case of eyes being contaminated, rinse with fresh water for 10min at least and give medical treatment immediately.
Recommend face guard with ventilation pipe for the sake of no absorption of paint fog and harmful solvent gas, especially in bad ventilation. Handle empty containers with care and do not bring about environmental contamination.
NOTICE: If consumers have not taken effective safety precautions (Refer to the specifications), out company will NOT be responsiblefor any accident.