LMP52-1 Chlorine Ether Long-lasting Heavy Anticorrosives Surface Paint

LMP52-1 Chlorine Ether Long-lasting Heavy Anticorrosives Surface Paint (two components)

Intended Uses Paint film is tough, with strong adhesive force, rapid dry, good weather resistance and excellent salt spary resistance. This resin does not contain saponficated ester bond, and makes paint have waterproof and chemical anticorrosive performance due to very stable helium atom. Without reactive double bond, it is not easy to degradete by atmophetie oxygenation, painting has atmospheric aging resistance and excellent light stability resistance, and not easy to pan and pulverization. Ethyl isobutyl ether in vinyl chloride co-isobutyl vinyl ether has inner plasticity, the painting has enough suppleness without foreign plasticizer, it will not brittle due tu migratin and loss of plasticizer. Vinyl chloride ther contains copolymeization, so it can guarantee that paint on various basic materials as aluminum and zinc surfaces has good adhesive force. It is applicablt to ship, container, harbour machinery and various steel structures as primer.
Product Description  It is prepared by import vinyl chloride co-isobutyl vinyl ether, modified resin, plasticizer, pigment, auxiliary and solvent. Package it in two components Component A and B. (Various colors)
Product Information Volume Solids 50%
Dry Film Thickness 50 microns
Theoretical Coverage 150g/m2(calculated by 50μm dry film)
Application Details Mix Ratio A: B =100:4(By weight)
Curing Time 23±2℃:0.5~1h
Method of Application
Airless Spray Recommended-Tip range: 17-21mm; Total fluid pressure: 15-20 Mpa
Brush or Roller Recommended, only for small area.
Conventional Spray Adoptable but thin to 5-10%, Tip range:2-2.5mm
Thinner LMP52-1 Speical diluent
Cleaner LMP52-1 Speical diluent
Pot Life 25℃:8 hours
Storage Life One year
Full Solidification
Overcoating Interval
Minimum Maximum
25℃ 4 24 7 24 hours 7 days
Storage and Handing Storage Store in cool and dry conditions
Pack Size Component A 20kg, Component B 0.8kg.
Specific Gravity Approx 1.00-1.25kg/L
Specification and Surface Preparation If preceding paint has been polluted, appropriate methods shall be used to remove grease and dust and this lacquer diliuent can be used to clean.
Limitations Substrate temperature must be 3℃ higher than dew point above, and relative humidity must be less than 85%.
Safety Precautions This product should be used in painting area by professional operations. When painting, please refer to Product Data Sheet and MSDS. Consult our company if consumers could not completely understand the precautions for safety and health when applying this product.
This product is a kind of solvent-based paint. In order to avoid danger or accident, minimal safety precautions, as follow, should be done;
The paint contains volatile solvent and is flammable. So must keep away form sparks and open flames. No smoking at application site. Effective precautions (such as using explosion-proof electrical equipments, no static electricity accumulation or metal collision etc) also should be done so as to avoid producing sparks. Flash point of paint, mentioned above o Product Data Sheet, is the lowest temperature at which mixture of the volatile materials of paint can ignite or explode with air.
Enough ventilation is necessary at application site. In order to remove any danger of explosion, must keep the ratio of gas to air is less than 10%, the minimum explosive limit in general. Therefore, 200m3 of ventilation quantity per 1kg solvent (according to the solvent) is necessary.
Protect skin and eyes, and avoid touching with paints (Recommend to wear working clothes, gloves, eye protection, face masks, barries creams and so on). If paint gets in touch with skin, wash fully with a large amount of fresh water and soap or appropriate commercial cleaner. In case of eyes being contaminated, rinse with fresh water for 10min at least and give medical treatment immediately.
Recommend face guard with ventilation pipe for the sake of no absorption of paint fog and harmful solvent gas, especially in bad ventilation. Handle empty containers with care and do not bring about environmental contamination.
NOTICE: If consumers have not taken effective safety precautions (Refer to the specifications), out company will NOT be responsiblefor any accident.