H52-1 Epoxy Glass Flake Surface Paint

H52-1 Epoxy Glass Flake Surface Paint (two components)

Intended Uses It has good water resistance and permeability of chemicals, strong adhesive force, high mechanical strength, perface anti-corrosion and certain decoration. It is applicable to steel structure and concrete facility primers and can also be intermediate paint.
Product Description It is prepared by epoxy resin, glass flake, other pigments, filler, auxiliary, solvent and curing agent. It is packed into Component A and Component B. (Various colors)
Product Information Volume Solids 65%
Dry Film Thickness 200 microns
Theoretical Coverage 180g/m2 ,2.60m2 /L(calculated by 200μm dry film)
Application Details Mix Ratio A:B=100:8~18(By weight)(With high and low temperature, mixture ratio is different, the specific details comply with the specified requirements of product when delivery)
Curing Time 23±2℃:20~30min
Method of Application
Airless Spray Recommended-Tip range: 17-21mm; Total fluid pressure: 15-20 Mpa
Brush or Roller Recommended, only for small area.
Conventional Spray Adoptable but thin to 5-10%, Tip range:2-2.5mm
Thinner X-7
Cleaner X-7
Pot Life 25℃:3 hours
Storage Life One year
Full Solidification
Overcoating Interval
Minimum Maximum
10℃       48 hours 14 days
25℃ 2 24 7 24 hours 7 days
30℃       12 hours 3 days
Storage and Handing Storage Store in cool and dry conditions
Pack Size Component A 25kg, Component B 4kg.
Flash Point 25℃
Specific Gravity Approx 1.25kg/L
Specification and Surface Preparation If painting interval time of preceding paint has exceeded interval requirements, preceding paint shall be grinded roughly.
Preceding Paint Epoxy glass flake anti-rust paint and epoxy micaceous iron oxide antoirust paint.
Subsequent Paint Epoxy high build surface paint.
Limitations Substrate temperature must be 3℃ higher than dew point above, and relative humidity must be less than 85%, when consturction substrate temperature is less than 5℃, epoxy and curing agent will stop reaction, and construction can not be conducted.
Safety Precautions This product should be used in painting area by professional operations. When painting, please refer to Product Data Sheet and MSDS. Consult our company if consumers could not completely understand the precautions for safety and health when applying this product.
This product is a kind of solvent-based paint. In order to avoid danger or accident, minimal safety precautions, as follow, should be done;
The paint contains volatile solvent and is flammable. So must keep away form sparks and open flames. No smoking at application site. Effective precautions (such as using explosion-proof electrical equipments, no static electricity accumulation or metal collision etc) also should be done so as to avoid producing sparks. Flash point of paint, mentioned above o Product Data Sheet, is the lowest temperature at which mixture of the volatile materials of paint can ignite or explode with air.
Enough ventilation is necessary at application site. In order to remove any danger of explosion, must keep the ratio of gas to air is less than 10%, the minimum explosive limit in general. Therefore, 200m3 of ventilation quantity per 1kg solvent (according to the solvent) is necessary.
Protect skin and eyes, and avoid touching with paints (Recommend to wear working clothes, gloves, eye protection, face masks, barries creams and so on). If paint gets in touch with skin, wash fully with a large amount of fresh water and soap or appropriate commercial cleaner. In case of eyes being contaminated, rinse with fresh water for 10min at least and give medical treatment immediately.
Recommend face guard with ventilation pipe for the sake of no absorption of paint fog and harmful solvent gas, especially in bad ventilation. Handle empty containers with care and do not bring about environmental contamination.
NOTICE: If consumers have not taken effective safety precautions (Refer to the specifications), out company will NOT be responsiblefor any accident.