%{tishi_zhanwei}%

S52-40 Polyurethane Surface Paint (Outdoor Type)

S52-40 Polyurethane Surface Paint (Outdoor Type)

Intended Uses The best protective and decorative finish in industry. Semi-gloss or high-gloss, good fullness, low golss rate exposed in the sun for along time, good color retention, no yellowing.
Excellent resistance to abominable climate, excellent abrasion resistance and resistance to chemicals and solvents. Suitable for various mechanical equipment in various climate conditions as highly protective and decorative finish.
Product Description Two packages, Polyurethane finish, Component B is curing agent of aliphatic isocyanate.
Product Information Volume Solids 45-50% according to the color
Dry Film Thickness 30-50μm
Theoretical Coverage 100g/m2 (calculated by 40μm dry film)
Pratical Coverage Allow appropriate loss
Application Details Mix Ratio A:B =5:1 (weight ratio)
Silver, A:B:C =8:5:2 (weight ratio)
Method of Application
Airless Spray Recommended
Brush or Roller Suitable, but apply with short fur roller or soft brush to decrease bubble.
Conventional Spray Recommended
Thinner If necessary, use X-10
Cleaner X-10
Pot Life 35℃:2 hours
Storage Life A: One year B: 6 months
Drying
Time
Substrate
Temperature
Touch
Dry
(h)
Hard
Dry
(h)
Overcoating Interval
Minimum Maximum
23℃ 1 24 16 hours 3 days
Storage and Handing Storage Store in cool and dry conditions
Pack Size A: 20kg in 20 liter container
B: 5kg in 4 liter container
Flash Point Above 23℃ (Basic agent, curing agent or mixture)
Specific Gravity Approx 1.30kg/L
Specification and Surface Preparation Used for surface over primer or intermediate coating and the surface must be clean, dry and no oil or dirty.
Preceding coat: Epoxy ester, epoxy or polyurethane primer or intermediate paint.
Limitations The components must be mixed according to the stipulated proportion at the application site and use up within the pot life. After mixing and stirring to even, setting for 5-30 min is recommended before application.
The storage and painting application be far away from moisture.
At high temperature, the maximum overcoating interval is only one day.
Ensure the painting equipments clean and dry, because any remainder the curing agent of epoxy resin, will shorten the pot life. The painting utensil must be cleaned on time.
Safety Precautions This product should be used in painting area by professional operations. When painting, please refer to Product Data Sheet and MSDS. Consult our company if consumers could not completely understand the precautions for safety and health when applying this product.
This product is a kind of solvent-based paint. In order to avoid danger or accident, minimal safety precautions, as follow, should be done;
The paint contains volatile solvent and is flammable. So must keep away form sparks and open flames. No smoking at application site. Effective precautions (such as using explosion-proof electrical equipments, no static electricity accumulation or metal collision etc) also should be done so as to avoid producing sparks. Flash point of paint, mentioned above o Product Data Sheet, is the lowest temperature at which mixture of the volatile materials of paint can ignite or explode with air.
Enough ventilation is necessary at application site. In order to remove any danger of explosion, must keep the ratio of gas to air is less than 10%, the minimum explosive limit in general. Therefore, 200m3 of ventilation quantity per 1kg solvent (according to the solvent) is necessary.
Protect skin and eyes, and avoid touching with paints (Recommend to wear working clothes, gloves, eye protection, face masks, barries creams and so on). If paint gets in touch with skin, wash fully with a large amount of fresh water and soap or appropriate commercial cleaner. In case of eyes being contaminated, rinse with fresh water for 10min at least and give medical treatment immediately.
Recommend face guard with ventilation pipe for the sake of no absorption of paint fog and harmful solvent gas, especially in bad ventilation. Handle empty containers with care and do not bring about environmental contamination.
NOTICE: If consumers have not taken effective safety precautions (Refer to the specifications), out company will NOT be responsiblefor any accident.