%{tishi_zhanwei}%

J52-61 Chlorosulfonated Polyethylene Surface Paint

J52-61 Chlorosulfonated Polyethylene Surface Paint (two components)

Intended Uses It has excellent weather aging resistance, salt spray resistance, outstanding acid resistance, alkali resistance, salt corrosive resistance, chemical atmosphere resistance, waterproof, oil resistance, heat resistance, cold resistance, excellent physical mechanical property, strong adhesive force, good suppieness, construction. With wide application and convenient construction, it can be widely applicable to industrial architecture, cement metope, steel structure, chemical pipeline, tank and equipment which suffer from chemical atmosphere corrosion. It can be used in equipment and facilities of inner and outer walls of acid and alkali storage tank, inner and outer walls of ammonium nitrate prilling tower, shop warehouse wall and flooring which sufers from acid, alkali and salt corrosion, and used for water proofing of port and pier, reservoir and sewage pit as well as protective painting of petroleum, oil refining and chemical system architectures, equipment and oil tank surfaces, petroleum pipeline and oil tanker.
Product Description It is prepared by chlorosulfonated polyethylene rubber as basical material, adding sunthetic, rubber vulcanizer, accelerant, filler, additive and organic solvent. It is packed into Component A and Component B. (Various colors)
Product Information Volume Solids 15%
Dry Film Thickness 25 microns
Theoretical Coverage 180~200g/m2,4.75-5.55m2/L(calculated by 25μm dry film)
Application Details Mix Ratio A: B=10:1 (By weight)(Pink silver: A:B:C=10:1:2)
Method of Application
Brush or Roller Recommended, only for small area.
Conventional Spray Adoptable but thin to 5-10%, Tip range:2-2.5mm
Thinner X-1
Cleaner X-1
Pot Life 25℃:12 hours
Storage Life 8 months, Component C 12 months
Drying
Time
Substrate
Temperature
Touch
Dry
(h)
Hard
Dry
(h)
Full Solidification
(d)
Overcoating Interval
Minimum Maximum
25℃ ≤0.5 ≤24 7 4 hours 7 days
Storage and Handing Storage Store in cool and dry conditions
Pack Size Component A 20kg, Component B 2kg, Component C 20kg.
Flash Point Component A 10℃, Component B 16℃
Specific Gravity Approx 1.00kg/L
Specification and Surface Preparation Chlorosulfonated polyethylene anticorrosive primer, epoxy anti-rust paint, epoxy zinc rich primer and epoxy micaceous iron oxide anti-rust paint.
Limitations Environment temperature: -5℃-40℃, relative humidity ≤85%.
Safety Precautions This product should be used in painting area by professional operations. When painting, please refer to Product Data Sheet and MSDS. Consult our company if consumers could not completely understand the precautions for safety and health when applying this product.
This product is a kind of solvent-based paint. In order to avoid danger or accident, minimal safety precautions, as follow, should be done;
The paint contains volatile solvent and is flammable. So must keep away form sparks and open flames. No smoking at application site. Effective precautions (such as using explosion-proof electrical equipments, no static electricity accumulation or metal collision etc) also should be done so as to avoid producing sparks. Flash point of paint, mentioned above o Product Data Sheet, is the lowest temperature at which mixture of the volatile materials of paint can ignite or explode with air.
Enough ventilation is necessary at application site. In order to remove any danger of explosion, must keep the ratio of gas to air is less than 10%, the minimum explosive limit in general. Therefore, 200m3 of ventilation quantity per 1kg solvent (according to the solvent) is necessary.
Protect skin and eyes, and avoid touching with paints (Recommend to wear working clothes, gloves, eye protection, face masks, barries creams and so on). If paint gets in touch with skin, wash fully with a large amount of fresh water and soap or appropriate commercial cleaner. In case of eyes being contaminated, rinse with fresh water for 10min at least and give medical treatment immediately.
Recommend face guard with ventilation pipe for the sake of no absorption of paint fog and harmful solvent gas, especially in bad ventilation. Handle empty containers with care and do not bring about environmental contamination.
NOTICE: If consumers have not taken effective safety precautions (Refer to the specifications), out company will NOT be responsiblefor any accident.