F03-1 Phenolic Ready Mixed Paint

Intended Uses	Paint film is tough and bright, with certain waterproof and oil resistance, and has good compatibility and interpass adhesion with phenolic aldehyde, alcohol acid and oil anti-rust paints, as well as good construction performance, but weather resistance and colour retention are poor. It is applicable to indoor steel equipment, component and wooden surface protection and decoration.
Product Description	It is prepared by paint material tried by phenolic resin and dry vegetable oil, coloring pigment, extender pigment, drier and solvent. (various colors)
Product Information	Volume Solids		15%
	Dry Film Thickness		30 microns
	Theoretical Coverage		70~90g/m²，13.33m²/L (calculated by 30μm dry film)
	Pratical Coverage		Allow appropriate loss
Application Details	Method of Application
	Brush or Roller		Recommended, only for small area.
	Conventional Spray		Adoptable but thin to 5-10%, Tip range:2-2.5mm
	Thinner		X-8
	Cleaner		X-8
	Storage Life		One year
	Drying Time	Substrate Temperature	Touch Dry （h）	Hard Dry （h）	Overcoating Interval
					Minimum	Maximum
		25℃	4	24	24 hours	No limit
	Painting number		Suggest two paintings, dry film thickness reaches 80 microns.
Storage and Handing	Storage		Store in cool and dry conditions
	Pack Size		20kg
	Flash Point		26℃
	Specific Gravity		Approx 1.0-1.2kg/L
Specification and Surface Preparation	Preceding paint dries completely; are oil dirts and sundries on film shall be removed by appropriate method.
Preceding Paint	Red lead phenolic anti-rust paint, zinc yellow phenolic anti-rust paint and red iron oxide alkyd primer etc.
Limitations	Substrate temperature must be 3℃ higher than dew point above, and relative humidity must be less than 85%.
Safety Precautions	This product should be used in painting area by professional operations. When painting, please refer to Product Data Sheet and MSDS. Consult our company if consumers could not completely understand the precautions for safety and health when applying this product. This product is a kind of solvent-based paint. In order to avoid danger or accident, minimal safety precautions, as follow, should be done; The paint contains volatile solvent and is flammable. So must keep away form sparks and open flames. No smoking at application site. Effective precautions (such as using explosion-proof electrical equipments, no static electricity accumulation or metal collision etc) also should be done so as to avoid producing sparks. Flash point of paint, mentioned above o Product Data Sheet, is the lowest temperature at which mixture of the volatile materials of paint can ignite or explode with air. Enough ventilation is necessary at application site. In order to remove any danger of explosion, must keep the ratio of gas to air is less than 10%, the minimum explosive limit in general. Therefore, 200m3 of ventilation quantity per 1kg solvent (according to the solvent) is necessary. Protect skin and eyes, and avoid touching with paints (Recommend to wear working clothes, gloves, eye protection, face masks, barries creams and so on). If paint gets in touch with skin, wash fully with a large amount of fresh water and soap or appropriate commercial cleaner. In case of eyes being contaminated, rinse with fresh water for 10min at least and give medical treatment immediately. Recommend face guard with ventilation pipe for the sake of no absorption of paint fog and harmful solvent gas, especially in bad ventilation. Handle empty containers with care and do not bring about environmental contamination. NOTICE: If consumers have not taken effective safety precautions (Refer to the specifications), out company will NOT be responsiblefor any accident.