%{tishi_zhanwei}%

S53-82 Polyurethane Micaceous Iron Anti-rust Paint

S53-82 Polyurethane Micaceous Iron Anti-rust Paint

Intended Uses Thick paint film with excellent performance. As intermediate paint with semi-gloss, may protect the steel or concrete structure in corroisve conditions, such as special steel structure and engineering machinery etc.
Product Description Two-pack paint based on polyurethane resin; including MIO intermediate paint, Iron red intermediate paint and ones with other colors; Fast dry even at low temperature. The paint film may resist salt spray, moderate acid / alkali / salt and sovlents.
Product Information Volume Solids Approx 60%
Dry Film Thickness 50-100 microns
Theoretical Coverage 108g/m2(calculated by 50μm dry film)
Pratical Coverage Allow appropriate loss
Application Details Mix Ratio 4 parts to 1 parts (By weight)
Method of Application
Airless Spray Recommended
Brush or Roller Suitable
Conventional Spray Recommended, but thinning is necessary.
Thinner X-10
Cleaner X-10
Pot Life 5℃:6 hours 23℃:4 hours 35℃:2 hours
Storage Life One year
Drying
Time
Substrate
Temperature
Touch
Dry
(h)
Hard
Dry
(h)
Overcoating Interval
Minimum Maximum
5℃
23℃
35℃
≤2
≤1
≤0.5
≤36
≤16
≤12

24 hours
16 hours
8 hours

No limit
Storage and Handing Storage Dry and cool conditions, far from fire and heat source.
Storage Life A: One year B: 6 months
Pack Size A: 24kg in 20 liter container
B: 6kg in 10 liter container
Flash Point >23℃(A, B and their mixture)
Specific Gravity Approx 1.52kg/L
Specification and Surface Preparation The surface painted with primer should be clean, dry and free from grease.
Precedent coat: Epoxy based primer or intermediate paint and polyurethane based primer or intermediate paint. Also compatibale with understand polyester filler.
Subsequent coat: Polyurethane finish and acrylic top coat etc.
Limitations Must mix component A and B according to the practical necessary quantity. Recommend making this paint just before painting. Should use up in pot life in case it would cure and could not be used.
In storage or application, should avoid water vapor.
Safety Precautions This product should be used in painting area by professional operations. When painting, please refer to Product Data Sheet and MSDS. Consult our company if consumers could not completely understand the precautions for safety and health when applying this product.
This product is a kind of solvent-based paint. In order to avoid danger or accident, minimal safety precautions, as follow, should be done;
The paint contains volatile solvent and is flammable. So must keep away form sparks and open flames. No smoking at application site. Effective precautions (such as using explosion-proof electrical equipments, no static electricity accumulation or metal collision etc) also should be done so as to avoid producing sparks. Flash point of paint, mentioned above o Product Data Sheet, is the lowest temperature at which mixture of the volatile materials of paint can ignite or explode with air.
Enough ventilation is necessary at application site. In order to remove any danger of explosion, must keep the ratio of gas to air is less than 10%, the minimum explosive limit in general. Therefore, 200m3 of ventilation quantity per 1kg solvent (according to the solvent) is necessary.
Protect skin and eyes, and avoid touching with paints (Recommend to wear working clothes, gloves, eye protection, face masks, barries creams and so on). If paint gets in touch with skin, wash fully with a large amount of fresh water and soap or appropriate commercial cleaner. In case of eyes being contaminated, rinse with fresh water for 10min at least and give medical treatment immediately.
Recommend face guard with ventilation pipe for the sake of no absorption of paint fog and harmful solvent gas, especially in bad ventilation. Handle empty containers with care and do not bring about environmental contamination.
NOTICE: If consumers have not taken effective safety precautions (Refer to the specifications), out company will NOT be responsiblefor any accident.