H53-16 Epoxy High Performance High-build Primer

H53-16 Epoxy High Performance High-build Primer (two components)

Intended Uses Paint film has excellent anti-rust performance and anti-corrosion, good physical mechanical performance, wear resistance, collision resistance, sea water resistance, good salt spray resistance and good water penetration resistance. It is applicable to ship, bridge and steel structure as primer.
Product Description This paints is two components epoxy high build paint, curing agent is didided into two kinds like normal temperature solidification and low temperature solidification, curing agent A is applicable to the condition above 5℃ temperature, curing agent B is applicable to the condition between -10~5℃ temperature. (Aluminum red)
Product Information Volume Solids 57%
Dry Film Thickness 150 microns
Theoretical Coverage 395g/m2,3.75m2/L(calculated by 150μm dry film)
Pratical Coverage Allow appropriate loss
Application Details Mix Ratio Component A : Component B =5:1(weight ratio)
Curing Time 23±2℃:20min
Method of Application  
Airless Spray Recommended-Tip range: 17-21mm; Total fluid pressure: 15-20 Mpa
Brush or Roller Recommended, only for small area.
Conventional Spray Adoptable but thin to 5-10%, Tip range:2-2.5mm
Thinner X-7
Cleaner X-7
Pot Life 23±2℃:4h (curing agent A) 0±2℃:4h (curing agent B)
Storage Life One year
Overcoating Interval
Minimum Maximum
25℃ 4 24 4 hours 3 months
  -10℃:min, 60h,0℃: min, 24h,5℃: min, 12h
Storage and Handing Storage Store in cool and dry conditions
Pack Size Component A 20kg, Component B 4kg.
Flash Point 35℃
Specific Gravity Approx 1.48kg/L
Specification and Surface Preparation New steel surface reaches Swedish Derusting Standard Sa2.5 after shot blasting or sand blasting, the steel if need temporary protection, can be applied appropriate shop pigment can be painted appropriate shop primer, before the final painting, the broken shop primer and dirts shall be cleaned thoroughly.
Subsequent Paint All kinds of shop primers.
Limitations In order to avoid water vapor condensation, construction can be conducted in dry, clean surface with temperature 3℃ higher than dew point, when construction in narrow sapce and dry period, it shall be ventilated largely.
Safety Precautions This product should be used in painting area by professional operations. When painting, please refer to Product Data Sheet and MSDS. Consult our company if consumers could not completely understand the precautions for safety and health when applying this product.
This product is a kind of solvent-based paint. In order to avoid danger or accident, minimal safety precautions, as follow, should be done;
The paint contains volatile solvent and is flammable. So must keep away form sparks and open flames. No smoking at application site. Effective precautions (such as using explosion-proof electrical equipments, no static electricity accumulation or metal collision etc) also should be done so as to avoid producing sparks. Flash point of paint, mentioned above o Product Data Sheet, is the lowest temperature at which mixture of the volatile materials of paint can ignite or explode with air.
Enough ventilation is necessary at application site. In order to remove any danger of explosion, must keep the ratio of gas to air is less than 10%, the minimum explosive limit in general. Therefore, 200m3 of ventilation quantity per 1kg solvent (according to the solvent) is necessary.
Protect skin and eyes, and avoid touching with paints (Recommend to wear working clothes, gloves, eye protection, face masks, barries creams and so on). If paint gets in touch with skin, wash fully with a large amount of fresh water and soap or appropriate commercial cleaner. In case of eyes being contaminated, rinse with fresh water for 10min at least and give medical treatment immediately.
Recommend face guard with ventilation pipe for the sake of no absorption of paint fog and harmful solvent gas, especially in bad ventilation.
Handle empty containers with care and do not bring about environmental contamination.
NOTICE: If consumers have not taken effective safety precautions (Refer to the specifications), out company will NOT be responsiblefor any accident.