%{tishi_zhanwei}%

H53-6 Micaceous Iron Oxide Epoxy Anticorrosive Paint/Intermediate Paint

H53-6 Micaceous Iron Oxide Epoxy Anticorrosive Paint/Intermediate Paint

Intended Uses Used as anticorrosive primer or additional laver for anti-corrosve primer, which will enhance sealing and anti-corrosion properties, this paint, is alnighly shielded material and contains scale pigment r-Fe2O2 with higher pigment volume concentration ,which cam overlap, arrange parallelly and form an oriemtation similar to overlapping structure of "fish scale". Therefore, it is possessed of higher sealing property. In addition, it forms a coating with good resistance to heat and corrosion, this paint is adle to match with most of paints.
Product Description Grey of brown, primer or intermediate paint. Two packages.
Product Information Volume Solids 65%
Dry Film Thickness 100 microns equivalent to 154 microns of wet film
Theoretical Coverage 218g/m2
Pratical Coverage Allow appropriate loss
Application Details Mix Ratio Component A (Paint media): Component B (Curing agent)=25:3 (By weight)
Method of Application
Airless Spray Recommended-Tip range 0.38-0.53mm, Total output fluid pressure: 17.6MPa(176Kg/sq.cm)
Brush or Roller Recommended
Conventional Spray Not recommended
Thinner X-7
Cleaner X-7
Pot Life 25℃:8h
Storage Life One year
Drying
Time
Substrate
Temperature
Touch
Dry
(h)
Hard
Dry
(h)
Overcoating Interval
Minimum Maximum
25℃ 2 24

10 hours

9 months
Storage and Handing Storage Store in cool and dry conditions
Pack Size Component A: 25kg
Component B: 3kg
Flash Point 23℃(after mix)
Specific Gravity Approx 1.50kg/L
Specification and Surface Preparation The surface to applied must be clean and dry.
Limitations Recommend coat: Spray one coats with high-pressure airless spray, which makes the dry film thickness reach 100 microns.
Precdeing coat: Epoxy zinc-rich shop primer, Epoxy zinc dust primer, Iron red epoxy shop primer, inorganic zinc silicate shop primer, wash primer etc.
Subsequent coat: High-build epoxy finish, Epoxy deck paint, Chlorinated rubber finish, Chlorosuphonated polyethylene anti-corrosive paint, Alkyd hold paint, Alkyd spary paint, Alkyd ship hull paint, High-build coal-tar epoxy paint etc.
Safety Precautions This product should be used in painting area by professional operations. When painting, please refer to Product Data Sheet and MSDS. Consult our company if consumers could not completely understand the precautions for safety and health when applying this product.
This product is a kind of solvent-based paint. In order to avoid danger or accident, minimal safety precautions, as follow, should be done;
The paint contains volatile solvent and is flammable. So must keep away form sparks and open flames. No smoking at application site. Effective precautions (such as using explosion-proof electrical equipments, no static electricity accumulation or metal collision etc) also should be done so as to avoid producing sparks. Flash point of paint, mentioned above o Product Data Sheet, is the lowest temperature at which mixture of the volatile materials of paint can ignite or explode with air.
Enough ventilation is necessary at application site. In order to remove any danger of explosion, must keep the ratio of gas to air is less than 10%, the minimum explosive limit in general. Therefore, 200m3 of ventilation quantity per 1kg solvent (according to the solvent) is necessary.
Protect skin and eyes, and avoid touching with paints (Recommend to wear working clothes, gloves, eye protection, face masks, barries creams and so on). If paint gets in touch with skin, wash fully with a large amount of fresh water and soap or appropriate commercial cleaner. In case of eyes being contaminated, rinse with fresh water for 10min at least and give medical treatment immediately.
Recommend face guard with ventilation pipe for the sake of no absorption of paint fog and harmful solvent gas, especially in bad ventilation.
Handle empty containers with care and do not bring about environmental contamination.
NOTICE: If consumers have not taken effective safety precautions (Refer to the specifications), out company will NOT be responsiblefor any accident.