H53-1 Epoxy Glass Flake Anti-rust Paint

H53-1 Epoxy Glass Flake Anti-rust Paint (two components)

Intended Uses It is applicable to ship, ocean engineering and other steel and concrete surfaces requiring heavy anti-corrosion, with excellent waterproof and chemical permeability resistance, high adhesive force, strong mechanical strength and perfect anti-rust performance.
Product Description White, iron red, light grey, pale green, etc. Two packages
Product Information Volume Solids 75%-80% according to the color
Dry Film Thickness 150 microns equivalent to 185-200 microns of wet film, maximum up to 300 microns
Theoretical Coverage 270-303g/m2
Pratical Coverage Allow appropriate loss
Application Details Mix Ratio Component A (Paint media): Component B (Curing agent)=100:8~18 (It depends upon the practical temperature)(By weight)
Method of Application
Airless Spray Recommended-Tip range 0.53-0.66mm, Total output fluid pressure: 19MPa(190Kg/sq.cm)
Brush or Roller Recommended
Conventional Spray Not recommended
Thinner X-7, Maximum thining: <5%
Cleaner X-7
Pot Life 25℃:2.5 hours
Storage Life One year
Overcoating Interval
Minimum Maximum
20℃ 2 24

24 hours

7 days
Storage and Handing Storage Store in cool and dry conditions
Pack Size A: 25kg in 20 liter container
B: 4kg in 4 liter container
Flash Point 23℃
Specific Gravity Approx 1.45-1.50kg/L
Specification and Surface Preparation The surface to applied must be clean and dry.
Limitations Preceding coat: Epoxy glass flake anti-corrosive primer, micaceous iron oxide anti-corrosive paint etc.
Safety Precautions This product should be used in painting area by professional operations. When painting, please refer to Product Data Sheet and MSDS. Consult our company if consumers could not completely understand the precautions for safety and health when applying this product.
This product is a kind of solvent-based paint. In order to avoid danger or accident, minimal safety precautions, as follow, should be done;
The paint contains volatile solvent and is flammable. So must keep away form sparks and open flames. No smoking at application site. Effective precautions (such as using explosion-proof electrical equipments, no static electricity accumulation or metal collision etc) also should be done so as to avoid producing sparks. Flash point of paint, mentioned above o Product Data Sheet, is the lowest temperature at which mixture of the volatile materials of paint can ignite or explode with air.
Enough ventilation is necessary at application site. In order to remove any danger of explosion, must keep the ratio of gas to air is less than 10%, the minimum explosive limit in general. Therefore, 200m3 of ventilation quantity per 1kg solvent (according to the solvent) is necessary.
Protect skin and eyes, and avoid touching with paints (Recommend to wear working clothes, gloves, eye protection, face masks, barries creams and so on). If paint gets in touch with skin, wash fully with a large amount of fresh water and soap or appropriate commercial cleaner. In case of eyes being contaminated, rinse with fresh water for 10min at least and give medical treatment immediately.
Recommend face guard with ventilation pipe for the sake of no absorption of paint fog and harmful solvent gas, especially in bad ventilation.
Handle empty containers with care and do not bring about environmental contamination.
NOTICE: If consumers have not taken effective safety precautions (Refer to the specifications), out company will NOT be responsiblefor any accident.