%{tishi_zhanwei}%

C53-10 Alkyd Iron Red Anticorrosive Paint

C53-10 Alkyd Iron Red Anticorrosive Paint

Intended Uses The coating forms with good adhesion and anti-corrosion, good compatibility with nitro, alkyd or other top paint. Suited as anti-corrosive primer surface of steel constructions in or dinaty corrosive condition, but durability not good in heat and humid environment.
Product Description Iron red, free from lead.
Product Information Volume Solids 53%
Dry Film Thickness 50 microns
Theoretical Coverage 125g/m2
Practical Coverage Allow appropriate loss
Application Details Mix Ratio One package
Method of Application  
Airless Spray Recommended
Brush or Roller Recommended
Conventional Spray Suitable
Thinner X-6
Cleaner X-6
Pot Life No limit
Storage Life One year
Drying
Time
Substrate
Temperature
Touch
Dry
(h)
Hard
Dry
(h)
Overcoating Interval
Minimum Maximum
5℃
23℃
35℃
4
2
1
24
24
18
24 hours
24 hours
18 hours
15 days
Storage and Handing Storage Dry, cool conditions, away from fire and heat source.
Pack Size 25kg in 20 liter container
Flash Point 38℃
Specific Gravity Approx 1.60kg/L
Specification and Surface Preparation The surface of steel must be prepared to Sa2.5 or with manual treatment to St3.
Preceding coat: Various shop primer.
Subsequent coat: Various alkyd top paint.
Limitations Don't overcoating with epoxy and polyurethane paint.
Safety Precautions This product should be used in painting area by professional operations. When painting, please refer to Product Data Sheet and MSDS. Consult our company if consumers could not completely understand the precautions for safety and health when applying this product.
This product is a kind of solvent-based paint. In order to avoid danger or accident, minimal safety precautions, as follow, should be done;
The paint contains volatile solvent and is flammable. So must keep away form sparks and open flames. No smoking at application site. Effective precautions (such as using explosion-proof electrical equipments, no static electricity accumulation or metal collision etc) also should be done so as to avoid producing sparks. Flash point of paint, mentioned above o Product Data Sheet, is the lowest temperature at which mixture of the volatile materials of paint can ignite or explode with air.
Enough ventilation is necessary at application site. In order to remove any danger of explosion, must keep the ratio of gas to air is less than 10%, the minimum explosive limit in general. Therefore, 200m3 of ventilation quantity per 1kg solvent (according to the solvent) is necessary.
Protect skin and eyes, and avoid touching with paints (Recommend to wear working clothes, gloves, eye protection, face masks, barries creams and so on). If paint gets in touch with skin, wash fully with a large amount of fresh water and soap or appropriate commercial cleaner. In case of eyes being contaminated, rinse with fresh water for 10min at least and give medical treatment immediately.
Recommend face guard with ventilation pipe for the sake of no absorption of paint fog and harmful solvent gas, especially in bad ventilation. Handle empty containers with care and do not bring about environmental contamination.
NOTICE: If consumers have not taken effective safety precautions (Refer to the specifications), out company will NOT be responsiblefor any accident.