%{tishi_zhanwei}%

H52-16 Solvent-free Epoxy Glass Flake Paint

H52-16 Solvent-free Epoxy Glass Flake Paint

Intended Uses May provide long-term anticorrosive protection for steel or concrete structure in all kinds of serious corrosive conditions, such as underground/ subaqueous equipments, apparatus in sewage pool or to touch certain chemicals. Especially suitable for the application in the concition of bad ventilation. May replace galss fiber reinforced plastic or rubber lining. Also used to bind glass cloth as lining. Easy to apply and repair.
Product Description No volatile organic solvent, and volume solids high to 100%. May get thick paint film after applying only once with this paint. Cure at room temperature.
Because of labyninth effect deduced from the altermate overlapping form of glass flake, which this paints contains highly, this paint film shows excellent shielding, impermeability and resistance to corrosion from permeation of corrosive medium. Possess excellent adhesion, wearbility, and resistance to water/salt water/chemicals.
Product Information Volume Solids 100%
Dry Film Thickness Recommend 200-300 microns
Theoretical Coverage 260g/m2(calculated by 20μm dry film)
Practical Coverage Allow appropriate loss
Application Details Mix Ratio A: B =5:1 (weight ratio)
Method of Application  
Airless Spray Recommend, and total output fluid pressure depends on application temperature and viscosity of paint.
Brush or Roller Suitable, but be careful that each coat is no more than 400μm and otherwise, running would take place,.
Conventional Spray Not recommend
Thinner In general, unnecessary. If necessary, use X-7
Cleaner X-7
Pot Life For summer: 35℃:20-35min; 25℃:30-45min
For winter: 15℃:30-45min; 5℃:45-60min
Storage Life One year
Drying
Time
Substrate
Temperature
Touch
Dry
(h)
Hard
Dry
(h)
Full Solidification
(d)
≤8
≤12
≤12
≤24
≤1
≤3
≤3
≤5
35℃
25℃
15℃
5℃

≤4
≤8
≤8
≤12

Storage and Handing Storage Store in cool and dry conditions
Storage Life One year
Flash Point Component A 20kg, Component B 4kg.
Specific Gravity >65℃(A,B and their mixture)
Store in cool and dry conditions 1.3-1.4 kg/L
Specification and Surface Preparation Steel Structures: New steel structure must be blasted to bei in accordance with Sa2.5 Standard or rust-removed with power tools to reach St3 grade. Wash grease away with solvents. Keep the surface to be painted clean and dry. Concrete Substrate: Should have been aged for at leat 20 days. Its water content should be no more than 6%. The surface should be free from dust and painted with permeable primer sealer before applied with this paint product. Recommend using the paint for summer when the temperature is over 20℃ at the application site and if it is between temperature of substrate should be 3℃ more than the dew point.
Must mix component A and B according to the practical necessary quantity. Recommend marking this paint just before painting with it. Should stir to even before application. It is recommended to use up in pot life in case it would cure and could not be used.
Safety Precautions This product should be used in painting area by professional operations. When painting, please refer to Product Data Sheet and MSDS. Consult our company if consumers could not completely understand the precautions for safety and health when applying this product.
This product is a kind of solvent-based paint. In order to avoid danger or accident, minimal safety precautions, as follow, should be done;
The paint contains volatile solvent and is flammable. So must keep away form sparks and open flames. No smoking at application site. Effective precautions (such as using explosion-proof electrical equipments, no static electricity accumulation or metal collision etc) also should be done so as to avoid producing sparks. Flash point of paint, mentioned above o Product Data Sheet, is the lowest temperature at which mixture of the volatile materials of paint can ignite or explode with air.
Enough ventilation is necessary at application site. In order to remove any danger of explosion, must keep the ratio of gas to air is less than 10%, the minimum explosive limit in general. Therefore, 200m3 of ventilation quantity per 1kg solvent (according to the solvent) is necessary.
Protect skin and eyes, and avoid touching with paints (Recommend to wear working clothes, gloves, eye protection, face masks, barries creams and so on). If paint gets in touch with skin, wash fully with a large amount of fresh water and soap or appropriate commercial cleaner. In case of eyes being contaminated, rinse with fresh water for 10min at least and give medical treatment immediately.
Recommend face guard with ventilation pipe for the sake of no absorption of paint fog and harmful solvent gas, especially in bad ventilation. Handle empty containers with care and do not bring about environmental contamination.
NOTICE: If consumers have not taken effective safety precautions (Refer to the specifications), out company will NOT be responsiblefor any accident.