%{tishi_zhanwei}%

H52-18 Anticorrosive Solvent Free Anticorrosive Paint

H52-18 Anticorrosive Solvent Free Anticorrosive Paint

Intended Uses Not containing volatile organic solvent, the volume solids up to 100%, curing at room temperature (5-45℃).
The coating possesses excellent resistance to chemicals, oil, water, sea water and heat. The coating has no effect on the various oils. It's easy to be cleaned, non-toxic, and has good adhesion mechanical property and easy to apply. Suited for application under badly ventilated condition such as oiltank and oil-water carbine.
Product Description Two components, component A is basic agent, and B is curing agent. Stir till to even before application.
Product Information Volume Solids 100%
Dry Film Thickness Recommended 200-300μm
Theoretical Coverage 280~300g/m2(calculated by 200μm dry film)
Practical Coverage According to loss factor
Application Details Mix Ratio A: B=5:1 (weight ratio)
Method of Application  
Black coating Suitable for Coating or mending small area
Brush or Roller Suited for painting or mending small area. Be careful that one coat is no more than 300μm, other wise running roll happen.
Airless Spray Total output pressure depends on application temperature and viscosity of paint. One coat should be no more than 300 microns.
Thinner Not necessary. If no effect to application, may use X-7
Cleaner X-7
Induction period After mixing component A and B, can be used immediately without painting.
Pot Life 35℃-45min
Storage Life One year
Drying
Time
Substrate
Temperature
Touch
Dry
(h)
Hard
Dry
(h)
Full Solidification
(d)
Overcoating Interval
Minimum Maximum
23℃
35℃
6
4
24
16
7 days
7 days
7h
7h
7 days
7 days
Storage and Handing Storage Store in cool, dry fireproof conditions. The temperature of environment is no more than 45℃.
Pack Size Component A 20kg, Component B 4kg.
Flash Point >65℃
Specific Gravity 1.40-1.50kg/L
Specification and Surface Preparation The surface of steel should be prepared to Sa2.5 with shot or blasting. This paint can overcoat on various shop primer and anti-corrosive primer.
Limitations When applying must mix component A and component B according to practical necessary quantity, the stir to even, use up within the pot life in case waste due to curing.
After coating this paint, load oil until the paint cures completely. Whether this paint is suitable to store other goods don't be approved by out company in advance.
After coating this product, heating to 45-120℃ will decrease the drying time and increase the performance of paint system.
The coat is resistant to the following chemicals: Please contact our company about other chemicals.
Crude oil 200# solvent-type gasoline
Gasoline Lubricating oil
Gasoil  
Carbon oil Chemical sewage (containing acid alkali or salts)
Heavy oil Weak acid, weak alkali and must kinds of
Safety Precautions This product should be used in painting area by professional operations. When painting, please refer to Product Data Sheet and MSDS. Consult our company if consumers could not completely understand the precautions for safety and health when applying this product.
This product is a kind of solvent-based paint. In order to avoid danger or accident, minimal safety precautions, as follow, should be done;
The paint contains volatile solvent and is flammable. So must keep away form sparks and open flames. No smoking at application site. Effective precautions (such as using explosion-proof electrical equipments, no static electricity accumulation or metal collision etc) also should be done so as to avoid producing sparks. Flash point of paint, mentioned above o Product Data Sheet, is the lowest temperature at which mixture of the volatile materials of paint can ignite or explode with air.
Enough ventilation is necessary at application site. In order to remove any danger of explosion, must keep the ratio of gas to air is less than 10%, the minimum explosive limit in general. Therefore, 200m3 of ventilation quantity per 1kg solvent (according to the solvent) is necessary.
Protect skin and eyes, and avoid touching with paints (Recommend to wear working clothes, gloves, eye protection, face masks, barries creams and so on). If paint gets in touch with skin, wash fully with a large amount of fresh water and soap or appropriate commercial cleaner. In case of eyes being contaminated, rinse with fresh water for 10min at least and give medical treatment immediately.
Recommend face guard with ventilation pipe for the sake of no absorption of paint fog and harmful solvent gas, especially in bad ventilation. Handle empty containers with care and do not bring about environmental contamination.
NOTICE: If consumers have not taken effective safety precautions (Refer to the specifications), out company will NOT be responsiblefor any accident.