H52-19 Water-Miscible Epoxy Anti-Corrosive Finish

Intended Uses	It is widely used for the surface of metal or concrete, especially when it is not permitted releasing solvent because of the environment or sagety. No recommending using for the surface which exposed to sun.
Product Description	A serious of color, dark or bright, two-packages water-miscrible epoxy finish, the adherence, the rub-resist, the solvent-resist is good. It resist the salt fog and acid, alkali, salt.
Product Information	Volume Solids		48%
	Dry Film Thickness		50 microns euivalent to 104 microns of wet film
	Theoretical Coverage		125g/m²(calculated by 5μm dry film)
	Practical Coverage		Allow appropriate loss
	VOC content Volatile organic compound content		≤60g/L
Application Details	Mix Ratio		A(Paint media) : B(Curing agent) =41(weight ratio)
	Method of Application
	Airless Spray		Recommended-Tip range: 0.30-0.48mm, Total output fluid pressure >15Mpa
	Brush or Roller		Recommended
	Conventional Spray		Not recommended
	Thinner		Clear water
	Cleaner		Clear water
	Pot Life		20℃：3h
	Drying Time	Substrate Temperature	Touch Dry （h）	Hard Dry （h）	Overcoating Interval
					Minimum	Maximum
		25℃	≤60	≤24	3h	No limit
Storage and Handing	Storage		Store in cool and dry conditions (5-40℃), no exposing to forst
	Storage Life		One year
	Pack Size		Component A: 16kg, Component B: 4kg
	Flash Point		No
	Specific Gravity		Approx 1.10-1.20kg/L
Specification and Surface Preparation	The surface which was coated before: clean, dry and please be sure if the coat is permitted or not. The surface of the concrete: no water, no oil etc...
Limitations	Please mix and stir to even before application, during the application, the temperature of the environment should be above 10℃, the ralative humidity should be less than 80%, the substrate temperature should be more than 3℃ Above teh dew point, enough ventilation is necessary at the application site. No application when the temperature is too low during night. No application when it is raining or there is dew . The front coatings: water-miscible epoxy paint or others solvent-based paint which is permitted. The durability of the water-miscible paint is decided ny the condition of the application. For example, on the edge and quarter, the application need be handled carefully, aoviding the film.
Safety Precautions	This product should be used in painting area by professional operations. When painting, please refer to Product Data Sheet and MSDS. Consult our company if consumers could not completely understand the precautions for safety and health when applying this product. This product is a kind of solvent-based paint. In order to avoid danger or accident, minimal safety precautions, as follow, should be done; The paint contains volatile solvent and is flammable. So must keep away form sparks and open flames. No smoking at application site. Effective precautions (such as using explosion-proof electrical equipments, no static electricity accumulation or metal collision etc) also should be done so as to avoid producing sparks. Flash point of paint, mentioned above o Product Data Sheet, is the lowest temperature at which mixture of the volatile materials of paint can ignite or explode with air. Enough ventilation is necessary at application site. In order to remove any danger of explosion, must keep the ratio of gas to air is less than 10%, the minimum explosive limit in general. Therefore, 200m3 of ventilation quantity per 1kg solvent (according to the solvent) is necessary. Protect skin and eyes, and avoid touching with paints (Recommend to wear working clothes, gloves, eye protection, face masks, barries creams and so on). If paint gets in touch with skin, wash fully with a large amount of fresh water and soap or appropriate commercial cleaner. In case of eyes being contaminated, rinse with fresh water for 10min at least and give medical treatment immediately. Recommend face guard with ventilation pipe for the sake of no absorption of paint fog and harmful solvent gas, especially in bad ventilation. Handle empty containers with care and do not bring about environmental contamination. NOTICE: If consumers have not taken effective safety precautions (Refer to the specifications), out company will NOT be responsiblefor any accident.