%{tishi_zhanwei}%

B86-2 Crylic Acid High Altitude Structure Marking Paint

B86-2 Crylic Acid High Altitude Structure Marking Paint

Intended Uses Paint film has plump colorful color, with excellent mechanical performance, good weather resistance and gloss retention and color retention, prolonged sun exposure and rain ,not yellow or pulverizate, and can construct at low temperature. It is dedicated to sign and protection of cement chimney and steel structure.
Product Description It is prepared by crylic resin, plasticizer, auxiliary, weather resistance pigment and solvent, etc. (cerise and white)
Product Information Volume Solids 50%
Dry Film Thickness 50 microns
Theoretical Coverage 180~200g/m2(calculated by 5μm dry film)
Application Details Method of Application  
Brush or Roller Recommended, only for small area.
Conventional Spray Adoptable but thin to 5-10%, Tip range:2-2.5mm
Thinner B86-2 Special diluent
Cleaner B86-2 Special diluent
Storage Life One year
Drying
Time
Substrate
Temperature
Touch
Dry
(h)
Hard
Dry
(h)
Overcoating Interval
Minimum Maximum
12h No limit
25℃ ≤2 <8
Painting number Suggest 2-3 coats, dry film reaches 100~120μm
Storage and Handing Storage Store in cool and dry conditions
Pack Size 25kg
Flash Point 25℃
Specific Gravity Approx 1.20kg/L
Specification and Surface Preparation Concrete surface is required smooth and no loosen objects, grease dirt or adhesive sundries, fissure and pit shall be filled smoothly with putty, and water-adding volume shall not be more than 6%.
Limitations Environment temperature: -5℃-40℃, relative humidity ≤85%.
Safety Precautions This product should be used in painting area by professional operations. When painting, please refer to Product Data Sheet and MSDS. Consult our company if consumers could not completely understand the precautions for safety and health when applying this product.
This product is a kind of solvent-based paint. In order to avoid danger or accident, minimal safety precautions, as follow, should be done;
The paint contains volatile solvent and is flammable. So must keep away form sparks and open flames. No smoking at application site. Effective precautions (such as using explosion-proof electrical equipments, no static electricity accumulation or metal collision etc) also should be done so as to avoid producing sparks. Flash point of paint, mentioned above o Product Data Sheet, is the lowest temperature at which mixture of the volatile materials of paint can ignite or explode with air.
Enough ventilation is necessary at application site. In order to remove any danger of explosion, must keep the ratio of gas to air is less than 10%, the minimum explosive limit in general. Therefore, 200m3 of ventilation quantity per 1kg solvent (according to the solvent) is necessary.
Protect skin and eyes, and avoid touching with paints (Recommend to wear working clothes, gloves, eye protection, face masks, barries creams and so on). If paint gets in touch with skin, wash fully with a large amount of fresh water and soap or appropriate commercial cleaner. In case of eyes being contaminated, rinse with fresh water for 10min at least and give medical treatment immediately.
Recommend face guard with ventilation pipe for the sake of no absorption of paint fog and harmful solvent gas, especially in bad ventilation. Handle empty containers with care and do not bring about environmental contamination.
NOTICE: If consumers have not taken effective safety precautions (Refer to the specifications), out company will NOT be responsiblefor any accident.