%{tishi_zhanwei}%

DS Special Coal Tar Epoxide Paint

DS Special Coal Tar Epoxide Paint

Intended Uses Epoxy coal tar Component A is prepared by epoxy resin, hydroxyl resin, different melamine resin prepolymer and dehydration coal tar as main film forming matter, various auxiliaries, plasticizer and flaker reinforcement material. Component B adopt new generation of polyamide curing agent, dehydration coal tar and auxiliary, etc.
Product Description   Speical coal tar epoxide paint is applicable to nortar floor birck anti-corrosion of smelt, oil exploitation, oil refining and processing, acid making, alkali making and pharmacu, etc. object surface is adhered glass fibre cloth to strengthen anti-corrosion, it is a perfect, anti-rust paint, its characteristic is strong anticorrosive stability, and can adapt acid and alkali corrosion altermation. (Black, smooth and bright)
Product Information Theoretical Coverage Glass: 1100g/m², Acid-resistance clinker: 7000g/m²,
65 Thickness of brick cement: 7000g/m²~7800g/m²
Viscosity 200~500MPa.s
Surface dry 4~6 hours
Actual dry 48 hours
Suppieness 2mm
Adhesive force Grade 2
Impact resistance 40cm
Vitriol resistance (45%) Immerse for 24h, no changes
Tensile strength 5~9Pa
Sodium hydroxide resistance
(saturated liquid)
Immerse for 24h, no changes
Vitriol resistance (45%) Immerse for 24h, no changes
Waterproof Immerse for 24h, no changes
Petrol resistance (90#) Immerse for 24h, no changes
Hydrochioric acid (5~50%) Immerse for 24h, no changes
Nitric acid (5~40%) Immerse for 24h, no changes
Phophoric acid (5~50%) Immerse for 24h, no changes
Industrial water waste Immerse for 24h, no changes
Various engine oils Immerse for 24h, no changes
Salt solution (saturation) Immerse for 24h, no changes
Mix Ratio 6:4(weight ratio)
Specification and Surface Preparation  1. Floating sand, grease dirt and loosen sundries on concrete surface shall be removed, obvious hole defect shall be repaired.
2. Component A and Component B shall be prepared according to ratio, shall be stired evenly, static 20-30min, and used within 4h, diluent can be added when consistence increases, but not too much.
3. Paint two primers, 2-3 surface plants, 5cm connecting gap, and add cloth for reinforcement, if necessary.
Limitations Ambient temperature: 0℃~20℃ (low temperature curing agent), relative humidity: <15%, A and B must be stired adequately, and then constructe after 20-30min stationary.
Safety Precautions This product should be used in painting area by professional operations. When painting, please refer to Product Data Sheet and MSDS. Consult our company if consumers could not completely understand the precautions for safety and health when applying this product.
This product is a kind of solvent-based paint. In order to avoid danger or accident, minimal safety precautions, as follow, should be done;
The paint contains volatile solvent and is flammable. So must keep away form sparks and open flames. No smoking at application site. Effective precautions (such as using explosion-proof electrical equipments, no static electricity accumulation or metal collision etc) also should be done so as to avoid producing sparks. Flash point of paint, mentioned above o Product Data Sheet, is the lowest temperature at which mixture of the volatile materials of paint can ignite or explode with air.
Enough ventilation is necessary at application site. In order to remove any danger of explosion, must keep the ratio of gas to air is less than 10%, the minimum explosive limit in general. Therefore, 200m3 of ventilation quantity per 1kg solvent (according to the solvent) is necessary.
Protect skin and eyes, and avoid touching with paints (Recommend to wear working clothes, gloves, eye protection, face masks, barries creams and so on). If paint gets in touch with skin, wash fully with a large amount of fresh water and soap or appropriate commercial cleaner. In case of eyes being contaminated, rinse with fresh water for 10min at least and give medical treatment immediately.
Recommend face guard with ventilation pipe for the sake of no absorption of paint fog and harmful solvent gas, especially in bad ventilation. Handle empty containers with care and do not bring about environmental contamination.
NOTICE: If consumers have not taken effective safety precautions (Refer to the specifications), out company will NOT be responsiblefor any accident.