%{tishi_zhanwei}%

PN-5 Cyanide Coagulation Anti-rust Paint

PN-5 Cyanide Coagulation Anti-rust Paint (two components)

Intended Uses It belongs to aromatic polyurethance, with excellent chemical resistance, heat resistance and radiation resistance. Paint film has good physical and mechanical performance, high strength, wear resistance and gloss. It has excellent anti-corrosion; film has oil resistance, alkali resistance, salt resistance, chemicals resistance and industrial waste gas resistance. It is mainly used in facility and equipment, pipeline, oil tank, sluice, dam, wherf and mine, etc.
Product Description  Single component moist solidfication anti-rust paint consisting of cyanide coagulation pre polymers, additive, catalyst and color filler shall become two-component paint matched with mill base in decoration place. (Varnish: sepia, colored paint: various colors)
Product Information Volume Solids 40%
Dry Film Thickness 20~30 microns
Theoretical Coverage 60~80g/m2,12~16m2/L(calculated by 20~30μm dry film)
Application Details Mix Ratio Component A : Component B =100:20-50(weight ratio)
Curing Time 23±2℃:20min
Method of Application  
Airless Spray Recommended, only for small area.
Brush or Roller Adoptable but thin to 5-10%, Tip range:2-2.5mm
Patch winding It is only applicable to special position
Thinner PN-5 Cyanide Condensation Paint speical diluent
Pot Life 25℃:8h
Storage Life 6 months
Drying
Time
Substrate
Temperature
Touch
Dry
(h)
Hard
Dry
(h)
Full Solidification
(d)
Overcoating Interval
Minimum Maximum
5℃
25℃
35℃
≤0.8~8 ≤24 7 1~16h
0.5~8h
0.5~6h
24h
24h
24h
Painting number Suggest 4-5 coats (coating weight method of special position: one painting two oil or one painting therr oil), Dry film reaches 100~120μm.
Storage and Handing Storage Store in cool and dry conditions
Pack Size 20kg
Flash Point 23℃
Specific Gravity Approx 1.06kg/L
Specification and Surface Preparation Concrete surface shall be dry, and water-adding volume is controlled to 6%, concrete surface shall be smooth, without ore grain or loosen objects.
Limitations Ambient temperature: between -5℃~45℃. Construct when relative humidity is controlled no moisture condensation on surface generally, time of relative humidity amount and film dry will delay, and painting interval of adjaceent number shall be delayed when coating is painted.
Safety Precautions This product should be used in painting area by professional operations. When painting, please refer to Product Data Sheet and MSDS. Consult our company if consumers could not completely understand the precautions for safety and health when applying this product.
This product is a kind of solvent-based paint. In order to avoid danger or accident, minimal safety precautions, as follow, should be done;
The paint contains volatile solvent and is flammable. So must keep away form sparks and open flames. No smoking at application site. Effective precautions (such as using explosion-proof electrical equipments, no static electricity accumulation or metal collision etc) also should be done so as to avoid producing sparks. Flash point of paint, mentioned above o Product Data Sheet, is the lowest temperature at which mixture of the volatile materials of paint can ignite or explode with air.
Enough ventilation is necessary at application site. In order to remove any danger of explosion, must keep the ratio of gas to air is less than 10%, the minimum explosive limit in general. Therefore, 200m3 of ventilation quantity per 1kg solvent (according to the solvent) is necessary.
Protect skin and eyes, and avoid touching with paints (Recommend to wear working clothes, gloves, eye protection, face masks, barries creams and so on). If paint gets in touch with skin, wash fully with a large amount of fresh water and soap or appropriate commercial cleaner. In case of eyes being contaminated, rinse with fresh water for 10min at least and give medical treatment immediately.
Recommend face guard with ventilation pipe for the sake of no absorption of paint fog and harmful solvent gas, especially in bad ventilation. Handle empty containers with care and do not bring about environmental contamination.
NOTICE: If consumers have not taken effective safety precautions (Refer to the specifications), out company will NOT be responsiblefor any accident.