%{tishi_zhanwei}%

LL2000 Winter Environment Protection Thick Film Heavy Anti-rust Paint

LL2000 Winter Environment Protection Thick Film Heavy Anti-rust Paint (two components)

Intended Uses This paint has large tolerance to basic material surface and can be painted with r ust, and painted on wet painted surface, this paint's primer and surface paint can combinate, with high solid component, one-time painting dry film can reach 125μm, it belongs to environmental protective paint ,can solidify at low temperature (-10℃), and have enough use period in normal temperature. It has excellent physical mechanical performance and anticorrosive performance. It is applicable to steel structure painting of bridge, ship, oil platform, pipeline and storage tank, and applicable to concrete construction, etc.
Product Description   It is prepared by modified epoxy resin as basic material, new amine compound as curing agent, auxiliary, color filler and solvent, etc. (various colors)
Product Information Volume Solids 70%
Dry Film Thickness 125 microns
Theoretical Coverage 281g/m²,(calculated by 125μm dry film)
Application Details Mix Ratio Component A : Component B=100:22(weight ratio)
Curing Time 23 ±2℃:20min
Method of Application  
Airless Spray Recommended-Tip range 0.33-0.41mm, Output fluid pressure; 17.6-21.1MPa(176-211Kg/sq.cm)
Brush or Roller Recommended, only for small area.
Conventional Spray Adoptable but thin to 5-10%, Tip range:2-2.5mm
Thinner LL2000 Special diluent
Pot Life 25℃:4h
Storage Life One year
Drying
Time
Substrate
Temperature
Touch
Dry
(h)
Hard
Dry
(h)
Overcoating Interval
Minimum Maximum
25℃ ≤4 ≤24 6 hours 7 days
Painting number Suggest 2 coats
Storage and Handing Storage Store in cool and dry conditions
Pack Size Component A 18.2kg, Component B 4kg
Flash Point 35℃
Specific Gravity Apprpx 1.73kg/L
Specification and Surface Preparation Iron red and grease dirt on steel surface shall be cleaned before painting, and construct it after removing loose objects and sludge on concrete surface.
Preceding Paint Can be directly painted on steel or concrete surface, and painted two coats according to operating requirements.
Limitations This product can be used in construction and solidfication with temperature condition above 10℃ normally. Construction surface temperature and paint temperature shall be above this limit.
Safety Precautions This product should be used in painting area by professional operations. When painting, please refer to Product Data Sheet and MSDS. Consult our company if consumers could not completely understand the precautions for safety and health when applying this product.
This product is a kind of solvent-based paint. In order to avoid danger or accident, minimal safety precautions, as follow, should be done;
The paint contains volatile solvent and is flammable. So must keep away form sparks and open flames. No smoking at application site. Effective precautions (such as using explosion-proof electrical equipments, no static electricity accumulation or metal collision etc) also should be done so as to avoid producing sparks. Flash point of paint, mentioned above o Product Data Sheet, is the lowest temperature at which mixture of the volatile materials of paint can ignite or explode with air.
Enough ventilation is necessary at application site. In order to remove any danger of explosion, must keep the ratio of gas to air is less than 10%, the minimum explosive limit in general. Therefore, 200m3 of ventilation quantity per 1kg solvent (according to the solvent) is necessary.
Protect skin and eyes, and avoid touching with paints (Recommend to wear working clothes, gloves, eye protection, face masks, barries creams and so on). If paint gets in touch with skin, wash fully with a large amount of fresh water and soap or appropriate commercial cleaner. In case of eyes being contaminated, rinse with fresh water for 10min at least and give medical treatment immediately.
Recommend face guard with ventilation pipe for the sake of no absorption of paint fog and harmful solvent gas, especially in bad ventilation. Handle empty containers with care and do not bring about environmental contamination.
NOTICE: If consumers have not taken effective safety precautions (Refer to the specifications), out company will NOT be responsiblefor any accident.