%{tishi_zhanwei}%

H52-17 High Build Epoxy Paint For Wet Surface Construction

H52-17 High Build Epoxy Paint For Wet Surface Construction

Intended Uses Paint film has good closeness, iron red and corrosion resistances, fine physical mechanical properties which can be constructed on moist iron and cement surfaces and in natural conditions of rain and dew. The paint belongs to non-solvent and little smell type. It is applicable to ship, gallery and marine engineering, etc. especially as water and corrosion proof application in humied environment.
Product Description It is high solid high build paint prepared by epoxide resin as basic material and new type aminated compounds as curing agent. (Various colors)
Product Information Volume Solids 65%
Dry Film Thickness 20 microns
Theoretical Coverage 340g/m²,(calculated by 200μm dry film)
Application Details Mix Ratio Component A: Component B =3:1(weight ratio)
Curing Time 23 ±2℃:20min
Method of Application  
Airless Spray Recommended-Tip range 0.33-0.41mm, Output fluid pressure; 17.6-21.1MPa(176-211Kg/sq.cm)
Brush or Roller Recommended, only for small area.
Conventional Spray Adoptable but thin to 5-10%, Tip range:2-2.5mm
Thinner H52-17 Special diluent
Pot Life 25℃:4h
Storage Life One year
Drying
Time
Substrate
Temperature
Touch
Dry
(h)
Hard
Dry
(h)
Full Solidification
(d)
Overcoating Interval
Minimum Maximum
25℃ ≤4 ≤24 7 24 hours 7 days
Painting number Suggest 2 coats
Storage and Handing Storage Store in cool and dry conditions
Pack Size Component A 18kg, Component B 6kg.
Flash Point 35℃
Specific Gravity Approx 1.44kg/L
Specification and Surface Preparation Iron red and grease dirt on steel surface shall be cleaned before painting, and construct it after removing loose objects and sludge on concrete surface.
Preceding Paint Can be directly painted on steel or concrete surface, and painted two coats according to operating requirements.
Limitations This product can be used in construction and solidfication with temperature condition above 10℃ normally. Construction surface temperature and paint temperature shall be above this limit.
Safety Precautions This product should be used in painting area by professional operations. When painting, please refer to Product Data Sheet and MSDS. Consult our company if consumers could not completely understand the precautions for safety and health when applying this product.
This product is a kind of solvent-based paint. In order to avoid danger or accident, minimal safety precautions, as follow, should be done;
The paint contains volatile solvent and is flammable. So must keep away form sparks and open flames. No smoking at application site. Effective precautions (such as using explosion-proof electrical equipments, no static electricity accumulation or metal collision etc) also should be done so as to avoid producing sparks. Flash point of paint, mentioned above o Product Data Sheet, is the lowest temperature at which mixture of the volatile materials of paint can ignite or explode with air.
Enough ventilation is necessary at application site. In order to remove any danger of explosion, must keep the ratio of gas to air is less than 10%, the minimum explosive limit in general. Therefore, 200m3 of ventilation quantity per 1kg solvent (according to the solvent) is necessary.
Protect skin and eyes, and avoid touching with paints (Recommend to wear working clothes, gloves, eye protection, face masks, barries creams and so on). If paint gets in touch with skin, wash fully with a large amount of fresh water and soap or appropriate commercial cleaner. In case of eyes being contaminated, rinse with fresh water for 10min at least and give medical treatment immediately.
Recommend face guard with ventilation pipe for the sake of no absorption of paint fog and harmful solvent gas, especially in bad ventilation. Handle empty containers with care and do not bring about environmental contamination.
NOTICE: If consumers have not taken effective safety precautions (Refer to the specifications), out company will NOT be responsiblefor any accident.