J52-3 Cspe Gas Tank Corrosion-proof Paint

J52-3 Cspe Gas Tank Corrosion-proof Paint (primer/surface paint, underside, intermediate and paint components)

Intended Uses With distinct weathering and aging resistance, excellent H2S, acid, alkali and salt resistance, fine water, cold, warm wet aging and altermation of wetting and drying resistances, good physical mechanical performance, strong adhension, fast paint film dry, coat underside, intermadiate and paint auxiliaries and convinient construction, it is speically used for gas tank protection application.
Product Description   It is prepared by CSPE rubber as basic material with modified resin, vulcanizer, acclerant, inhibitive pigment, filler, additive and organic solvent, etc. It is packed into Component A, Component B, Component C. (Primer: reddish brown; Intermediate: chocolate brown; Surface paint: medium green)
Product Information Dry Film Thickness Primer: 35 microns, Intermediate: 50 microns,Surface paint: 25 microns.
Theoretical Coverage Primer: 250g/m²,4.20m²/L(calculated by 35μm dry film)
Intermediate: 350g/m²,3.15m²/L(calculated by 50μm dry film)
Surface paint: 175g/m²,5.28m/L(calculated by 25μm dry film)
Application Details Mix Ratio A:B=10:1
Method of Application  
Brush or Roller Recommended, only for small area.
Conventional Spray Adoptable but thin to 5-10%, Tip range:2-2.5mm
Thinner X-1
Pot Life 25℃:4~8h
Storage Life 6 months
  Overcoating Interval
Minimum Maximum
25℃ 0.5 24 Primer 2 hours 24 hours
Intermediate 2 hours 7 days
Surface paint 2 hours 30 days
Painting number 2 coats of primer, 1~2 coats of intermediate coat, 2~4 coats of surface paint.
Storage and Handing Pack Size Component A: 20kg, Component B: 2kg.
Flash Point Component A: 10℃,Component B: 16℃.
Specific Gravity Primer: approxl.00kg/, Intermediate: approx 1.10kg/L, Surface paint: 0.95kg/L。
Specification and Surface Preparation Steel surface requires shot blasting or sand blasting to Swedish Derusting Standard Sa2.5, or grinding to St3 by manual or electric tools. It shall eliminate oil stains and dusts on derusting surface before painting to avoid secondary rusting.
Limitations Environment temperature: -5℃-40℃, relative humidity ≤85%.
Safety Precautions This product should be used in painting area by professional operations. When painting, please refer to Product Data Sheet and MSDS. Consult our company if consumers could not completely understand the precautions for safety and health when applying this product.
This product is a kind of solvent-based paint. In order to avoid danger or accident, minimal safety precautions, as follow, should be done;
The paint contains volatile solvent and is flammable. So must keep away form sparks and open flames. No smoking at application site. Effective precautions (such as using explosion-proof electrical equipments, no static electricity accumulation or metal collision etc) also should be done so as to avoid producing sparks. Flash point of paint, mentioned above o Product Data Sheet, is the lowest temperature at which mixture of the volatile materials of paint can ignite or explode with air.
Enough ventilation is necessary at application site. In order to remove any danger of explosion, must keep the ratio of gas to air is less than 10%, the minimum explosive limit in general. Therefore, 200m3 of ventilation quantity per 1kg solvent (according to the solvent) is necessary.
Protect skin and eyes, and avoid touching with paints (Recommend to wear working clothes, gloves, eye protection, face masks, barries creams and so on). If paint gets in touch with skin, wash fully with a large amount of fresh water and soap or appropriate commercial cleaner. In case of eyes being contaminated, rinse with fresh water for 10min at least and give medical treatment immediately.
Recommend face guard with ventilation pipe for the sake of no absorption of paint fog and harmful solvent gas, especially in bad ventilation. Handle empty containers with care and do not bring about environmental contamination.
NOTICE: If consumers have not taken effective safety precautions (Refer to the specifications), out company will NOT be responsiblefor any accident.