%{tishi_zhanwei}%

FC900-1 Epoxy Antistatic Floor Coating

FC900-1 Epoxy Antistatic Floor Coating

Product Overview Product characteristics
◇ Without crack, compressive resistance, wear resistance and anti-skid, mildew-proof and water proof, dustproof and damp-proof, environmental protection and no small, and easy to clean;
◇ With strong adhesion, good flexure and impact resistance, it is easy to maintain;
◇ With characteristics such as rapid electrostatic charge leaking, flamboyant appearance, various colors, easy construction, economical and practical, everlasting antistatic, anti-electromagnetic wave production, and effective electrostatic production inhibition, etc.
Application scope
◇ Wall, floor and oil tank of factory required for antistatic with high requirements such as electronics factory, circuit board factory, instrument plant, instrument and meter plant, communication products, computer manufacturing factory, mobile phone manufacturing factory and mash gas, etc.
Technical Index
Test item Index
Dry time(h): Surface dry(h) ≤4
Hard dry(h) ≤24
Adhesion, grade ≤1
Pencil hardness ≥H
Impact resistacne, kg, cm 40
Flexibility 1mm pass
Wear resistance(750g/500r, weight loss, g) <0.02
Water resistance No change in 48h
10% sulfuric acid resistance No change in 56 days
10% ammonnium hydroxide resistance No change in 56 days
Gasoline resistance, 120# No change in 56 days
Surface resistance, Ω 105-108 1×106-1×109
Volume resistance, Ω 105-108 1×106-1×109
Construction Process ◇ Waterproof treatment: First floor ground shall be conducted for waterproof treatment;
◇ Ground treatment: Conduct grinding, dust removal and dust repair according to ground condition;
◇ Epoxy primer layer: Paint epoxy resin seal coat with strong perneability and adhesion, and enhance adhesion rate of film and basal plane;
◇ Conducting layer paving method:
A.Adopt conductive carbon black paint roller painting;
B.Adopt spreading conductive copper platinum method.
◇ Conductive putty payer: Subject to actual construction number required, requirements without pits, scrapping marks or grinding marks but smooth;
◇ Antistic topcoat layer: Prepare coating to roller paint (or scrap to paint) antistatic coating according to uniform condition of color and painting number;
◇ Measure whether film resistance meets national standard value.
Construction Planing Surface ZH
Notes ◇ Avoid construction under low temperature and high humidity condition;
◇ Construct in short time after mixing two-component materials;
◇ After painting, put into use after through maintenance;
◇ People can walk on it after construction for 24h, construction until will notify of the time for forkfit truck and trailer to travel and roil according to temperature.